Author |
Message |
Dsmitty25
| Posted on Sunday, October 11, 2009 - 01:48 am: |
|
Looking to find interface cable to run ecmspy and ect. bike is an 1125r.. thanks for any help. D |
Slypiranna
| Posted on Sunday, October 11, 2009 - 02:05 am: |
|
Dsmitty25, Look for a PM. |
Dsmitty25
| Posted on Sunday, October 11, 2009 - 10:40 am: |
|
Any Harley guys know if i can use a HD race tuner cable with a usb adapter on it to build this cable? I have a bunch of these race tuner cable they use to come with that tuner back a few years ago. I tried this but wasn't having luck, Kept just timing out the transmission when I tried to fetch the ecm data on my 1125r. |
Blake
| Posted on Sunday, October 11, 2009 - 02:19 pm: |
|
www.ecmspy.com http://www.ecmspy.com/kabel_pc.shtml |
Krassh
| Posted on Sunday, October 11, 2009 - 02:27 pm: |
|
http://www.americansportbike.com/shoponline/ccp0-p rodshow/A9317.html |
Packdog
| Posted on Monday, October 12, 2009 - 06:15 am: |
|
Dsmitty - Short answer is "no" I don't know enough about programming to use the right terminology, but basically the software was written to talk with a specific USB/serial chipset that translates the ECM "speak" to "serial speak". Cables made for VDSTS and Harley don't work. |
Chevycummins
| Posted on Monday, October 12, 2009 - 06:58 am: |
|
Could someone send me a PM on this topic please. Thanks! |
Dsmitty25
| Posted on Monday, October 12, 2009 - 10:03 am: |
|
Thanks Pac thats what i figure the case would be. was hoping id get lucky haha yeah right.. Looks like I'b ordering a cable 2day then. thanks Dustin |
Packdog
| Posted on Tuesday, October 13, 2009 - 09:03 am: |
|
Chevycummins - PM sent. |