G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Cbm2 Posted on Wednesday, October 07, 2009 - 10:29 pm:        Are the stock bars on a 2000 M2 the same as on the X1? Thanks a lot guys   Blackm2 Posted on Wednesday, October 07, 2009 - 11:57 pm:        Don't believe so. I've got an '01 and I just bought some S1 bars which are about an inch lower and not as much pull-back. S1 and X1 bars I think are very similar if not the same.   Guell Posted on Thursday, October 08, 2009 - 10:27 pm:        i think the m2 x1 bars are the same, i know 96 s1's had the most agressive bars of the tubers.   Natexlh1000 Posted on Friday, October 09, 2009 - 09:52 am:        I'm pretty sure the X1 bars are a bit more narrow. Been a while since I've seen both together side by side though. I am currently using low and wide bars for a dirtbike.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: