G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Old School Buell » Archive through October 14, 2009 » X1 lift « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Scottorious
Posted on Wednesday, October 07, 2009 - 11:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

anyone know of what points on my motorcycle i can hoist it into the air?...i want to hang it so i can start taking it apart for the winter refit...also does american sportbike have a warranty for their parts..the clutch cable i just got from there started leaking as soon as i put it on
Top of pagePrevious messageNext messageBottom of page Link to this message

Phelan
Posted on Thursday, October 08, 2009 - 01:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

You can lift it from the frame around the steering neck and from the backside of the frame (underneath the back of the gas tank). Why is the cable leaking? If it's leaking then you have too much lube in it, or you have a plugged transmission vent line (a plugged tranny ventline will push fluid past the trans seal, into the primary, and up the clutch cable).

(Message edited by Phelan on October 08, 2009)
Top of pagePrevious messageNext messageBottom of page Link to this message

Pkforbes87
Posted on Thursday, October 08, 2009 - 03:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Mine's hanging from a cherry picker right now by tow straps. In the rear, I wrapped them around where the subframe would mount to, and the strap supporting the front is looped around a part of the frame that runs side to side directly under where the fuel tank would be. (Hope that makes sense, I can try to take a pic tomorrow being that they're worth 1000 words and all..)

I personally wouldn't lift it like that though unless the engine is out of it.

Bike stands are a little pricey but very convenient. If you want to spend a little less though, and don't need the bike lifted off the ground you may consider just a front wheel chock. I got this one from Harbor Freight and use it regularly.



Here's the cherry picker I use:
(also from Harbor Freight)


Bike stands:
(Front is a Pit Bull from American Sport Bike, I'm not sure what brand the rear is but I know it's no longer available)
Top of pagePrevious messageNext messageBottom of page Link to this message

Kyrocket
Posted on Thursday, October 08, 2009 - 10:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I've been using these for my teardown/rebuild.
http://cgi.ebay.com/ebaymotors/Motorcycle-T-Rex-st ands-rear-front-triple-tree-Sil-S_W0QQcmdZViewItem QQhashZitem4398e60c8aQQitemZ290328022154QQptZMotor cyclesQ5fPartsQ5fAccessories

You get both at that price and they also come with all the needed appurtenances for whatever bike you're working on. I can lift from the triple tree or swap it out and lift from the forks. On the rear I can lift from a swingarm or swap it out and lift from a spool. They're very handy, can't believe I waited so long to get them.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration