| Author |
Message |
    
Rigid_frame
| | Posted on Tuesday, October 06, 2009 - 01:30 pm: | 
|
can you just un plug the o2 sensors and the bike still run,im wondering if this will richen it up just a little? |
Donutclub
| | Posted on Tuesday, October 06, 2009 - 04:59 pm: |
|
I'm guessing that you'd get an error code to show up if you just plug the O2 sensors. |
T_man
| | Posted on Tuesday, October 06, 2009 - 06:44 pm: |
|
You can just unplug them - you may or may not get an error code. I've read in other forums of people who have done just that and never got a code. Even if you get a code - it doesn't affect anything at all, its just a signal telling you the o2 sensors are not being sensed. If that makes any sense. Thats a lot of 'senses' isn't it?  |
Slypiranna
| | Posted on Tuesday, October 06, 2009 - 07:32 pm: |
|
Just how many NON stock pipes does this website have to see (1125 related) before everyone gets the hint...
They ALL need TUNING and/or other MODS prior to being HAPPY running 11's...
Notice there wasn't a question mark attached...keep learning the hard way if you must.
Hint;
THEY ALL NEED TUNING! 
What other modern efi bike doesn't require "tuning" when dealing with such mods...Duh! 
I'm really glad BMC continues to monitor those that post herein! LOL!...goodbye warranty, finally should be the result of another burnt 11 under SOME ignorant applications.
Bottom line, don't bitch "then". mm |
Slypiranna
| | Posted on Tuesday, October 06, 2009 - 07:35 pm: |
|
Cool lookin' pipe tho!  |
Thedavyboy
| | Posted on Tuesday, October 06, 2009 - 10:23 pm: |
|
that pipe looks really good on the cr |
Stlcr09
| | Posted on Tuesday, October 06, 2009 - 10:56 pm: |
|
Here is my CR with the pipe. a few vids too
http://s46.photobucket.com/albums/f141/markeagan19 87/2009%20Buell%201125CR/ |
Stlcr09
| | Posted on Tuesday, October 06, 2009 - 10:58 pm: |
|
bad link http://s46.photobucket.com/albums/f141/markeagan19 87/2009%20Buell%201125CR/ |
Hogs
| | Posted on Tuesday, October 06, 2009 - 11:04 pm: |
|
Damn Sure sounds Mechanical.... |
Stlcr09
| | Posted on Tuesday, October 06, 2009 - 11:32 pm: |
|
The camera really picked up on the engine noise. 1125's are noisy anyways |
Rigid_frame
| | Posted on Wednesday, October 07, 2009 - 08:38 am: |
|
yeah thanks sly i know it needs a tune but i dont have $300 right now, so i was just wondering if unhooking them would help my lean problem for the time being, until i have 300 for a tune |
T_man
| | Posted on Wednesday, October 07, 2009 - 08:55 am: |
|
Unplug the f*$ckers. Take it for a ride and see if it helped. They are easy to plug back in. No harm done. Disabling mine made a huge difference in low speed surging. |
Rigid_frame
| | Posted on Wednesday, October 07, 2009 - 09:00 am: |
|
thanks tman, so it will richen it up some? |
Stevej
| | Posted on Wednesday, October 07, 2009 - 04:08 pm: |
|
the o2 sensors only control closed loop at hot idle and steady state cruising. anytime you are at cold idle/startup, transitioning throttle or accelerating you are in open loop running off ECM map and not through the o2 sensors so no effect there. |
01xjbuell
| | Posted on Wednesday, October 07, 2009 - 04:14 pm: |
|
have had my 02's disconnected for a while now... no ill effects
Nick |
Rigid_frame
| | Posted on Wednesday, October 07, 2009 - 04:38 pm: |
|
i believe that is were it is running lean at a idle and crusing on highway, so this might fix my problem till i can afford to get a tuner? thanks again for all the help |
Geforce
| | Posted on Friday, October 09, 2009 - 11:41 pm: |
|
I assume their FULL RACE SYSTEM would be headers, mid pipe and muffler yes?
Can anyone take a picture of the quiet core and post it? I am trying to get some ideas here. |
Ponti1
| | Posted on Friday, October 09, 2009 - 11:51 pm: |
|
I'm really glad BMC continues to monitor those that post herein! LOL!...goodbye warranty, finally should be the result of another burnt 11 under SOME ignorant applications. }
Where's this coming from? Who's lost their warranty from putting on a slip-on? |
Stlcr09
| | Posted on Saturday, October 10, 2009 - 12:31 am: |
|
Geforce. I will take some pictures tomorrow. |
Xtreme6669
| | Posted on Saturday, October 10, 2009 - 12:53 am: |
|
Here are some pics of the insert... I was taking mine out tonight anyway so I snapped a few for ya.
taper going toward the muffler:
taper going toward the mid pipe:
insert out:
 |
Froggy
| | Posted on Saturday, October 10, 2009 - 01:04 am: |
|
quote:Who's lost their warranty from putting on a slip-on?
I can't recall any names, but I have seen it in the past. More to the story than you currently know. I can't recall details, but I want to say it was a Micron equipped XB. |
Smokescreen
| | Posted on Saturday, October 10, 2009 - 02:49 am: |
|
Who's lost their warranty from putting on a slip-on?
That would be StealthXB. Give him a pm, he's really unhappy with his Buell right now. That whole situation sucked all the way around. |
