Author |
Message |
Goldtooth
| Posted on Friday, September 25, 2009 - 08:45 pm: |
|
So lately I have been busy (and broke!). Installed the Forcewinder, ebay bar end mirrors, Eastcarbon tank accents, and ebay turn signals. All of the parts have been pretty good quality. The mirrors are rock solid, the turn signals work and fit great and even the Eastcarbon accents are ok. I had to drill holes for the mounts but it actually allowed me to get a pretty good fit. I am sure they are no where near the quality of the American Sport Bike ones but this is all I could afford for now. Also been playing with ECMSpy. Fun stuff!
|
Bishopjb1124
| Posted on Friday, September 25, 2009 - 09:07 pm: |
|
Bike looks great, I have the exact same bike. Number 273. It has the stock ECM in it and I have been looking for a tune to put into it. It has a white bros exhaust on it and it sounds pretty good, everything else is completely stock on it. I bought an undertail piece from eastcarbon and the fit was really bad but they gave me a prompt refund including shipping.
|
The4ork
| Posted on Friday, September 25, 2009 - 09:32 pm: |
|
is it possible to put that lower fairing on a s1? |
Blue_pipe
| Posted on Friday, September 25, 2009 - 09:51 pm: |
|
Nathan two thing-where did you get the signals from and also ECMSPY is that something you had or did you get that on E-bay ,a friend of mine sent me ECMSPY but he has an XB is the program the same, once you get inside ECMSPY you tune it to your bike. |
Goldtooth
| Posted on Friday, September 25, 2009 - 09:56 pm: |
|
cable- came with ECMSpy and maps http://cgi.ebay.com/ebaymotors/Buell-race-ECM-soft ware-ECMSPY-w-maps-diagnostics_W0QQitemZ1603636942 03QQcmdZViewItemQQptZMotorcycles_Parts_Accessories ?hash=item25566bc87b&_trksid=p3911.c0.m14 turn signals http://cgi.ebay.com/ebaymotors/LED-Motorcycle-Turn -Signal-Signals-Yamaha-YZF-R1-R6-07b_W0QQitemZ3303 13418409QQcmdZViewItemQQptZMotorcycles_Parts_Acces sories?hash=item4ce836c6a9&_trksid=p4506.c0.m245 nate |
Oldog
| Posted on Friday, September 25, 2009 - 10:32 pm: |
|
Nice ride there Tooth N-joy |
Littlebuggles
| Posted on Saturday, September 26, 2009 - 01:28 am: |
|
Looks great (yours too Bishop)! I like the way the ceramic header finish is similar to the aluminum Forcewinder intake elbow. I'll say it again, Red Stripe is my favorite X1. Ricky, yes, it's pretty easy and you can get a kit from A.S.B. |
Reducati
| Posted on Saturday, September 26, 2009 - 11:11 am: |
|
is it possible to put that lower fairing on a s1?....ummmm
|
Kalali
| Posted on Saturday, September 26, 2009 - 08:29 pm: |
|
The bike looks great. |
Kalali
| Posted on Saturday, September 26, 2009 - 08:33 pm: |
|
BTW, did you have to change your flasher relay for the LED turn signals? |
Goldtooth
| Posted on Saturday, September 26, 2009 - 09:02 pm: |
|
Kalali yes i got the one from asb. had a sic ride with the pbr boys today and really ran my tires down. may have to get some new ones before the season is over! hoping to hold out till spring. nate |