| Author | Message | ||
     Billetmetallic |
Lightly used 2" header size, all brackets, very nice pipe with some scratches and rock chips on the bottom. $80 plus shipping -g   | ||
| Onebadx1 |
Dibs, If this will fit my X1 | ||
| Brinnutz |
It's a 2" Steve. X1's have 2.5" 2" was 98 and earlier...=) | ||
| Onebadx1 |
Thanks Wilson. I retract the "dibs" If anyone has an SS2R that will fit an X1 please pm me. I'm looking for a friend of mine. Thanks | ||
| Brinnutz |
No prob man...Just helpin ya out! | ||
| Fasted |
i bought 2000 m2 that came with a v&h. the previous squid had let the packing go, which eventually caused the baffle to self destruct. baffle-$40, packing-$25. so i got the parts and did a better-than-original packing and wiring job on the baffle and surrounding free space. i replaced the rivets using a pneumatic riveter at a buddy's body shop. i mounted it on the biker and rode it for 1 day. still too loud for me. i have decided the stock system suits me more. so off it came, same day. the muff is in excellent condition and comes with the necessary elbow and rear mounting bracket with bolts and nut plate. it is essentially like new, asking $150+shipping | ||
| Billetmetallic |
wow, would that be the definition of thread hijacking? thanks for not undercutting me though  | ||
| Jreinke |
$80 shipped to 54935? | ||
| Onebadx1 |
Sorry Graham, Didn't mean to screw up your post. I did start my own WTB of a diff thread. | ||
| Fasted |
i'm sorry, i apologize. it actually isn't a hijack, as we are not offering the same item. yours is 2", mine is 2.5". it was early, i wasn't thinking yet, so once again, i was wrong, sorry | ||
| Onebadx1 |
Bump... For a Great deal on this Slip on! | ||
| Kalali |
Come on guys. Start a separate thread for a separate item...It is not that hard to do. | ||
| Onebadx1 |
Hey Kal!  | ||
| Billetmetallic |
bump | ||
| Billetmetallic |
no one? | ||
| Pkforbes87 |
Can you please email me pictures of the elbow separated from the muffler? I'm interested in this part because of the elbow only, and would like to see if it would work for what I have in mind. | ||
| 97m2 |
I'm interested. It's not clear to me from the picture that it will bolt on to a 97 M2, but it's not clear that it won't. Does anyone know? Thanks. | ||
| Littlebuggles |
2" collector should work for a stock header... I think. Blake's got an early Cyclone doesn't he? | ||
| Billetmetallic |
First off, I have someone first in line, just waiting for a reply, but... ...Pkforbes, i didnt know they seperated, I'll take a look at it tomorrow. ...97m2, it should totally work on a stock 97 cyclone -g | ||
| 97m2 |
Billetmetallic- OK. If the deal dosen't go through let me know. Thanks. -Ralph | ||
| Billetmetallic |
its up for grabs if you still want it -g (Message edited by billetmetallic on September 01, 2009) |
