| Author | Message | ||
     Tbenson |
Looking to put new bar ends on my 1125r, I like what Rizoma offers, but unsure which one will fit and do away with some vibration? I would also appreciate any other suggestions? | ||
| Carbonbigfoot |
Further, which ones work with those dead sexy mirrors? Anybody using Rizoma on their bike? R | ||
| Puredrive |
I am asking the same question. | ||
| Ekruizenga |
I have them on my bike, No vibration damping, as they have little to no weight. MA506 is what I have and can be used with bar end mirrors, as they do not taper at the end. I also have the sportline grips. See profile picture. | ||
| Tbenson |
I also see Rhino has some nice products, but they do not offer the weight of the ends. The Rizoma MA512 offers 65g. rather than 50g. which Ekruizenga states he has, but the MA512 does not except the mirrors. Does anyone know the current stock weight, if any, of the stock ends? Thanks Troy | ||
| Carbonbigfoot |
Little pieces of plastic. No appreciable weight. R | ||
| P_squared |
How about bar ends that you like in the looks department? The weight for damping vibration can be taken care of with plastic bags & some birdshot stuffed inside the bars before bar ends are installed. | ||
| Puredrive |
What are the size of these bars. I got a CR and I am shopping around for bar ends. TIA | ||
| Carbonbigfoot |
MA506 is what I have and can be used with bar end mirrors, as they do not taper at the end. http://www.pjsparts.com/catalog/product_info.php?p roducts_id=178 R (Message edited by carbonbigfoot on August 04, 2009) | ||
| Puredrive |
damn..I placed the order on the phone with PJs. They sent me the MA502 model  Its obviously the wrong model. | ||
| Andros |
19 mm inside diameter is what i was quoted when i bougt my bar end mirrors. | ||
| Tbenson |
I purchased the Rhino Moto bar ends, instead of the Rizoma. Very nice product, which I am sure the Rizoma's are also. | ||
| Puredrive |
I'm mainly doing this..because I am going to the retro mirrors. I just got off the phone with PJs. I was told that the 502s & 506s are the same item pretty much. Only difference is the black slider. I must of being doing the install wrong. There are two diameters to the bar. Where are you guys clamping? The smaller inner diameter? | ||
| Trojan |
The Rizoma 502 and 506 bar ends are supplied with various inserts to enable fitment in different size handlebars from narrow allow bars right up to 1" H-D bars. You just use the ones that fit your particular fitment. The 502 and 506 bar ends will allow use of the Rizoma bar end mirrors, but the 512 and 516 bar ends WILL NOT. The only difference between the 502 and 506 is the black plastic end cap on the 506 (and the price) and both are the same diameter. |
