G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through August 24, 2009 » S3T Stator « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Bprigge
Posted on Friday, July 31, 2009 - 11:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hello Buellers,

Sorry to be such a bothersome Bueller but I'm having yet another maintenance problem. This one I didn't cause myself.
My battery isn't holding a charge. A stator voltage check shows 0, yup that's right, zero AC voltage coming out of the stator at the 2 pin plug going to the regulator. I checked it with 2 different meters at 2000 rpm. The stator has no shorts to ground and reads .8 ohms resistance with a DVM. The no AC output is enough for me to order a stator. Does anybody know of any ideosyncracies or secret inside info regarding stator failures on 97 S3Ts? I really like this bike and would like to take it on an epic cross country this fall but I don't know if I will have the balls to head out of town on such a high maintenance machine. Bruce
Top of pagePrevious messageNext messageBottom of page Link to this message

Sparky
Posted on Saturday, August 01, 2009 - 05:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What rpm's are you registering 0 VAC and are you on an AC scale? Are you on the connector out of the stator?

When you check the stator lead to ground resistance are you on the infinity scale?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bprigge
Posted on Saturday, August 01, 2009 - 10:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sparky,

Yes, AC scale on both meters, I even dropped the range down to the 10V scale and got nothing, then stuck the meter in the wall outlet (higher scale) to see if it was working, it was. I think my DVM is auto ranging on ohms but i'll check it again to ground with my old analog meter set on RX1meg. Sure seems weird that the stator has O output, it's almost like the rotor is not turning but I don't think that's possible. I did find a chaff through on the regulator side of the two wire plug, looks like it rubbed through to ground. There's no sign of over heating in the wiring. Thanks for your interest and reply, Bruce
Top of pagePrevious messageNext messageBottom of page Link to this message

Sparky
Posted on Sunday, August 02, 2009 - 01:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Most likely, the bare wire you found had shorted out the stator wiring and that's why it does not put out AC volts yet it reads some ohms.

Do you know what caused the exposed VR wire?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bprigge
Posted on Sunday, August 02, 2009 - 09:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sparky, no, I haven't run down the insulation wear through yet but I'm thinking those manly vibes that you get below 3K rpm had something to do with it.

Bruce
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration