Author |
Message |
Cyclonemick
| Posted on Monday, July 27, 2009 - 08:27 am: |
|
I need to get the Stock piece that the Seat Screw (screws into) for a 00M2. The stock piece is built in the stock seat! I recently purchased a Used Corbin seat and the Damn thing will not tighten! I thought if I could get that piece and fix it to the Corbin I could then switch between my two seat with no hassle! My wife does not like the Corbin, But I do! |
Brinnutz
| Posted on Monday, July 27, 2009 - 09:25 am: |
|
Mickey, Reread that email I sent to you awhile back. The stock seats have the threaded part built into it and there's no part number for that. Anyways, the Corbin is a removable piece of metal. Take out the piece, and the screw to a shop of a friend that can do it and have them make something exactly like it. You could try tacking a nut with the same threads onto a piece of metal that would fit also. |
Cyclonemick
| Posted on Monday, July 27, 2009 - 12:10 pm: |
|
Yeah I guess I'll have to go that route, I haven't checked but does that screw come out easily? |
Brinnutz
| Posted on Monday, July 27, 2009 - 12:27 pm: |
|
Yeah, just took it off of my other one, there are two regular screws. Just take those off and that little metal piece comes off. |
|