G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Wolfridgerider Posted on Saturday, July 25, 2009 - 11:28 pm:        coffee table.... Just got this 2000 "BLASTKET" case from Jimduncan69. The starter was shot and the bike was/is in a state of disassemble... but I hope to have it back on the road soon... I need a primary gasket... and I know when I go to the local dealer and ask for a primary gasket for a 2000 Blast... well, we know what the answer will be so what else will do the job?? XB? Sportster??   Badlionsfan Posted on Saturday, July 25, 2009 - 11:39 pm:        Since that's an XB9 motor minus a cylinder, The primary gaskets should be the same. Try posting this in the Blast forum, bet they know for sure but I'll also bet I'm correct.   Jimduncan69 Posted on Saturday, July 25, 2009 - 11:40 pm:        hey that bike looks familiar. i know she is in good hands. so now tell me what did the wife say?   Toona Posted on Saturday, July 25, 2009 - 11:46 pm:        I jut wanna know why you are using a swimming pool filter as an air filter.....   Wolfridgerider Posted on Saturday, July 25, 2009 - 11:48 pm:        Its not what she said... it was more the look...   Wolfridgerider Posted on Saturday, July 25, 2009 - 11:50 pm:        I jut wanna know why you are using a swimming pool filter as an air filter I have no idea how that crazy thing works...   Cityxslicker Posted on Sunday, July 26, 2009 - 02:22 am:        hey, wait a second. What mutant exhaust is on the bottom of that bike? Inquiring BLASTARDS want to know!   Gregtonn Posted on Sunday, July 26, 2009 - 03:13 am:        Looks like a Vance & Hines to me. Someone probably changed the packing 'cause the rivets are different. G   Ezblast Posted on Sunday, July 26, 2009 - 03:13 am:        lol   Wolfridgerider Posted on Sunday, July 26, 2009 - 08:40 am:        Its a Vance and Hines... and I still need to know the answer to this... I need a primary gasket... and I know when I go to the local dealer and ask for a primary gasket for a 2000 Blast... well, we know what the answer will be so what else will do the job?? XB? Sportster??   Not_purple_s2 Posted on Sunday, July 26, 2009 - 09:25 am:        The gasket for a 2003 XB9S will Not work. I had an spare gasket for my 9 that I thought I could use on my gf's 2001 blast. However, when I compared them there was 1 one! bolt hole at the top that did not match. That was the only difference. I'm 100% sure if you go to a Buell dealership they will have, or be able to get, a gasket for a 2000 Blast. I mean they better be stocked up on parts if they want to keep all these Rider's Edge Blasts running indefinitely.   Fast1075 Posted on Sunday, July 26, 2009 - 11:49 am:        The gasket is not a problem Mark...all year model blasts use the same gasket. It is the same gasket as an XB except for one hole at the top. In the thumper forum, read up on how to adjust the primary..the service manual is wrong...it will end up too tight if you follow the manual.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: