Author |
Message |
Scoot
| Posted on Thursday, July 23, 2009 - 10:08 pm: |
|
hey guys i was wondering if we could get a list of mods up to improve handling. I got my bike cammed/etc. but i really wanna make it outhandle anything in turns. What and where can i get some mods like steering stabalizer.... Thanks |
Skntpig
| Posted on Thursday, July 23, 2009 - 10:20 pm: |
|
Check this out: http://www.badweatherbikers.com/buell/messages/476 23/478024.html?1247712003 You can also do a frame brace and a works or Penske shock. Penske is better but more $. Better tires. Check with Al at americansportbike.com he's a sponsor here. |
Pkforbes87
| Posted on Friday, July 24, 2009 - 12:14 am: |
|
"My bike used to do a low frequency wallow on higher speed sweepers" Mine does that. I've sort of learned to accept that I'm riding a street bike, not a race bike, so will have to deal with a few imperfections whenever I ask a lot of the suspension. |
Sloppy
| Posted on Friday, July 24, 2009 - 01:59 am: |
|
How a bike handles is dependent on how you ride. Most Buells will outbreak and outhandle the rider - so the first step is to get YOU to be able to ride to the capability of the bike. Take a few track days and then figure out where the limitations are. I can highly recommend the "Keith Code" classes. It's amazing how hard you can stress the suspension and frame on this bike. And each track, turn, asphalt and tire will demand a different riding style and hence require you to ride in a very disciplined fashion so you can figure out how to ride faster everywhere. |
Limitedx1
| Posted on Friday, July 24, 2009 - 08:39 am: |
|
if you want it to handle better, get a good set of tires and alot of trust. remember normal roads are not groomed and swept |
Ratbuell
| Posted on Friday, July 24, 2009 - 09:07 am: |
|
The high speed / low frequency wallow is likely frame and swingarm flex. My tubers do it a little; my Uly, not at all because it's rigid as hell and the wheels never 'flex' in relation to each other. Frame brace helps a lot on early tubers. Got a Banke brace on my S2, it was there when I bought it. I rode it once with it off (after a base gasket replacement) and it felt like the bike was gonna fall apart by comparison. |
Lake_bueller
| Posted on Friday, July 24, 2009 - 09:26 am: |
|
Without spending silly money on a Penske or Works rear shock, here are a few pointers that helped with my S1W. 1) Race springs in front forks 2) Frame brace 3) PROPER suspension tuning!!!! This is a black magic but makes a huge difference. 4) Good tires And like Ron said....TRUST!!! And like Sloppy mentioned, if you REALLY want to learn to ride your bike, get out on the track. My riding skills skyrocketed after a few days at the track. But be careful....it's addictive!!!! |
|