Author |
Message |
Trev_dawg2
| Posted on Sunday, July 12, 2009 - 03:32 am: |
|
hey guys, so i bought the micron exhaust about a month ago and just got an 07 XB12R. has anyone heard or seen one with that exhaust on it. anybody have an opinion. also, is it tough to change. ive heard its not too bad. thanks for your time. look forward to getting it on there and seeing you out on the road. |
M1combat
| Posted on Sunday, July 12, 2009 - 04:13 am: |
|
That one and the Drummer are top notch. |
Tomike00
| Posted on Sunday, July 12, 2009 - 06:56 am: |
|
I installed a Micron on an 03 XB9S. I am the least mechanically inclined person I know (SERIOUSLY), and I was able to do it. Take your time and read up on it a little bit. There are some threads on this site about it, do a search. I think it looks great on my bike. Best to do an open airbox mod/K & N filter or something similar, and you will also need an ECM remap, or you will run very lean. Good luck! |
Bishopjb1124
| Posted on Sunday, July 12, 2009 - 08:24 am: |
|
The change out is not that bad at all me and my buddy did it with minimal tools in abotu 2 hours. Just remember patiene is a virtue. |
New12r
| Posted on Sunday, July 12, 2009 - 10:03 am: |
|
Be ready for some tuning, the bike will not run worth a shit unless you map it with that exhaust. |
Xoptimizedrsx
| Posted on Monday, July 13, 2009 - 06:20 pm: |
|
you still have that pipe new12? |
Glitch
| Posted on Monday, July 13, 2009 - 06:24 pm: |
|
you still have that pipe new12? Yes he has it, and yes I'm working on getting it on my bike |
Froggy
| Posted on Monday, July 13, 2009 - 07:25 pm: |
|
I need a header!
|
Tattoo72
| Posted on Monday, July 13, 2009 - 07:46 pm: |
|
Holy crap Froggy! How the hell did that happen and are you ok? |
Froggy
| Posted on Monday, July 13, 2009 - 08:38 pm: |
|
To the Quickboard Robin! http://www.badweatherbikers.com/buell/messages/406 2/476298.html?1247528888 |
Al_lighton
| Posted on Monday, July 13, 2009 - 09:26 pm: |
|
I have two micron headers in stock...one new one, silver ceramic coated, and the other one, slightly used but in excellent condition (core return on our coating program). Not cheap, but the price is the same as it was when they were available from Micron, I haven't jacked them up. The headers alone are $425, coated adds $169. Al |
Froggy
| Posted on Monday, July 13, 2009 - 09:47 pm: |
|
Al, great to know if I go the replacement route. Still figuring out details with insurance. |
|