Author |
Message |
Buford
| Posted on Saturday, June 27, 2009 - 07:32 pm: |
|
Got one of these ramps for the 07 XB12. Their website doesnt have install instructions for Buells yet...was wondering what all is involved? thanks! |
Ochoa0042
| Posted on Saturday, June 27, 2009 - 07:56 pm: |
|
swap it out.. simple.. and then adjust the clutch screw correctly** when reassembling **tighen the adjust screw till it lightly bottoms, then turn out 1/4-1/2 a turn. I usually give a 1/4 turn out, then a little bit more so that the lock nut seats in (Message edited by ochoa0042 on June 27, 2009) |
Buford
| Posted on Sunday, June 28, 2009 - 02:22 pm: |
|
Is it located behind the trans fill cover plate or? |
Oxygen151
| Posted on Sunday, June 28, 2009 - 03:37 pm: |
|
Its located behind the larger of the two cover plates on the primary case. The one nearest the footpeg. Lightly bottoms is a very loose term, I have still yet to figure out exactly where the screw "loosely bottoms" at. |
|