Author |
Message |
Truth
| Posted on Tuesday, June 16, 2009 - 04:14 pm: |
|
Hey all, I purchased a Buell race exhaust system and ECM for my 99 M2. In the paper work for the ECM, it says you need to get the TPS re zeroed. I called Appleton Harley and was told by the service Dept that they never heard of that. What exactly needs to be done? Thanks, Frank. |
Hootowl
| Posted on Tuesday, June 16, 2009 - 05:01 pm: |
|
You don't need to set the TPS offset on your M2...it doesn't have one. Only the DDFI bikes have those. You are blessed/cursed (depending on your point of view) with a carburetor. |
Hootowl
| Posted on Tuesday, June 16, 2009 - 05:03 pm: |
|
You may want to verify that you have the correct ECM for your bike. The M2 ECM is not really an ECM, it's an ignition module. If the instructions say to reset the TPS,you may have the wrong one. |
Firebolt020283
| Posted on Tuesday, June 16, 2009 - 07:10 pm: |
|
there is no TPS on a m2 |
Texastechx1
| Posted on Tuesday, June 16, 2009 - 08:28 pm: |
|
you got the generic set of intructuions that come with the race exhaust... they say to reset the TPS becuase ORIGINALLY it was sold as a KIT with the RACE ECM and air box mods. in other words... pay no attention to it... because your M2 doesn't have an ECM at all... just an ignitoon box that doesn't even have a TPS. |
Truth
| Posted on Wednesday, June 17, 2009 - 10:38 am: |
|
Hey guys, After looking everything over last night, I realized that I had no TPS.. Thanks for the help! Can't wait to see what the buell runs like with the pipe and ignition! |
Hootowl
| Posted on Wednesday, June 17, 2009 - 11:13 am: |
|
You will most likely need to rejet to avoid a lean condition. I don't know the sizes off the top of my head. |
Hootowl
| Posted on Wednesday, June 17, 2009 - 11:16 am: |
|
search for m2 and jet...plenty of hits. |
Bluzm2
| Posted on Wednesday, June 17, 2009 - 04:36 pm: |
|
45 and a 185 or so. |
|