Author |
Message |
Easy_rider
| Posted on Wednesday, June 10, 2009 - 06:55 pm: |
|
I'm grasping at straws here, but thought it was worth checking. In my bucket of parts I've got a speedo drive and a spacer. Another spacer that looked identical was attached to the bike. The service manual calls out two parts that I can't find. By any chance, are they already attached to the drive (see pic)? Was there possibly a change that used two identical spacers rather than three individual parts?
Thanks for any info you have. |
F_skinner
| Posted on Wednesday, June 10, 2009 - 07:22 pm: |
|
Roger, hard to tell but that looks like just the speedo drive. Check part 6 to see if part 5 is in it. |
Easy_rider
| Posted on Wednesday, June 10, 2009 - 08:53 pm: |
|
As a matter of fact, when I went to look at the old PM wheel (ok, it was my neighbor that went to look) #6 was in it. Item #3 may still be MIA, though. Great idea!!! |
Midnight_rider
| Posted on Wednesday, June 10, 2009 - 09:58 pm: |
|
looks #3 is still there to me looks like mine |
Easy_rider
| Posted on Wednesday, June 10, 2009 - 10:28 pm: |
|
Thanks. It seemed to fit well, so I was hoping that was the case. I'd have been uneasy (no pun intended) for a while, though. |
|