| Author | Message | ||
     Prebs75 |
Ok i just got my force exhaust sandblasted and powder coated black looks sweet, drove 100 miles today in 70 degree weather, parked for 4-5 hours got back on and started going through the gears normal all the sudden i now get a bad vibration at 3,400. whats the worst case and best case for this??? it definatly feels like its in the motor | ||
| Guell |
Check over the exhaust and i would check the iso's | ||
| Brinnutz |
Iso's...check'em as the little fella above said. | ||
| Onebadx1 |
What are iso's...? | ||
| Sleez |
check the front motor mount bracket bolts!!! | ||
| Pkforbes87 |
Iso = isolator. Rubber mounts that ISOLATE vibration from the engine, and reduce it from being 100% transferred into the frame. | ||
| Prebs75 |
i looked this morning and the rubber is all twisted up in that front mount thanks for the tip!!! is it advisable to drive it like this since its a long weekend and the weather is great will it wreck anything??? | ||
| Prebs75 |
any idea what these cost does nt look like it should be to much | ||
| Jramsey |
Yes, riding with a failed front Iso will hammer the the front Iso head mount causing sheared bolts/pulled threads in the head and possibly a broken head mount. The Buell Iso is the cheapest around $30+ (I think) I used the 16207-79D big twin Iso's on both my tubers, the last one was $63.88  (Message edited by `J.ramsey on May 24, 2009) |
