G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Bookyoh Posted on Monday, May 18, 2009 - 08:40 pm:        Hello: I just bought a set of PM wheels for my '01 S3T. The PM wheel only has a flange to bolt the rotor to unlike the Castalloy which is threaded. My parts book does not show any nuts,washers or anything for attachment other than the existing bolts. Can someone post a photo or a description of how your rotor attaches to your rear PM wheel? Thanks, Mark   Tdman77 Posted on Monday, May 18, 2009 - 08:46 pm:        As long as the PM wheel came with the adapter all you need is some lock nuts to bolt it on. The adapter bolts to the wheel with 5 bolts and the rotor bolts up to that. Here is a thread that covers what you are asking. http://www.badweatherbikers.com/buell/messages/476 23/456309.html   Bookyoh Posted on Monday, May 18, 2009 - 08:54 pm:        Thanks TDman77. I searched the Knowledge Vault yesterday and must have missed this. Mark   Tdman77 Posted on Monday, May 18, 2009 - 09:14 pm:        No problems, I just went thru this and it was still fresh in my very short memory. You did use new bolts on the f/r rotors I hope. I got some from American Sport Bike but found them at my local hardware store when looking for the nuts for the rear.   Bookyoh Posted on Monday, May 18, 2009 - 09:22 pm:        Actually, the wheels are still sitting in the box. I will get new bolts for each. Thanks!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: