Author |
Message |
Pkforbes87
| Posted on Sunday, May 17, 2009 - 03:39 am: |
|
Is there a way in ecmspy to change the entire fuel map by a certain percentage? I'm just going through and changing each individual block but it's sort of time consuming and I would think that with all of the awesome options this program has, it must have a feature for this that I'm just overlooking. |
Tdman77
| Posted on Sunday, May 17, 2009 - 09:15 am: |
|
You might want to PM Gunter. If anyone knows how he will. |
Kalali
| Posted on Sunday, May 17, 2009 - 12:32 pm: |
|
PK, there is a very easy way to do it. Fetch the maps, go to the spot where the maps has the row/column heading, click the right mouse button and select the entire map. You will know when it is selected when you see the entire map is dark color. Then go down to the left lower side of the page where you see the cell value and the 1.0 in front of it. Increase the 1.0 to the value you want using the up arrow key, say 1.05 for 5% increase, etc., and the click on the =. This will increase the entire map by 5%. Remember you can only do this when the bike is turned off. Save the map and then turn on the bike (key and kill switch to on) and Load the Map. The common mistake is trying to do this with the bike in the On mode and the software does not allow it, as far as I could tell. Hope this helped. |
Pkforbes87
| Posted on Sunday, May 17, 2009 - 03:53 pm: |
|
thanks, that bit of information will prevent me from doing it cell by cell, and a lot of math in my head. |
Pkforbes87
| Posted on Sunday, May 17, 2009 - 04:26 pm: |
|
Got it. I had to hit the * button instead of the =. |
Kalali
| Posted on Sunday, May 17, 2009 - 04:33 pm: |
|
Yup sorry I was going by memory. * is the button. Glad it worked out. |
Zac4mac
| Posted on Tuesday, May 26, 2009 - 09:53 am: |
|
bump |
|