| Author | Message | ||
     Sleez |
ok 1125 dudes... do the regular/traction etc. pegs for the XB line mount ok on the 1125s? thanks for any input guys. | ||
| Zac4mac |
Not sure which pegs you refer to, but the Lightning and Ulysses pegs both have a 1-inch drop and work fine on 1125s. I think the Lightning pegs might take a little filing to fit. Uly pegs mount right up, with a bit of a gap at the top. No mods are necessary tho. I have black Uly pegs(earlier had silver- see profile pic) on my 08 1125R, my feet love them. Z | ||
| Sleez |
was mostly checking to see if the traction pegs would work on the 1125. thanks. | ||
| Rockstarblast1 |
I take it this is in question for the pegs that you have for sale that I asked this about. Take it no one knows for sure | ||
| Zac4mac |
They should work, pretty standard design for the fit. If they fit an XB, they will fit an 1125. At the very worst, some peg-sets require a little filing to lay flat. Many parts are interchangeable, XB to 1125, pegs are in that group. Z | ||
| Sleez |
thanks zac Rockstarblast1; the answer seems yes, but maybe need some fitting. | ||
| Doctorneon |
I put one inch drop pegs on my R, it was off of a new buell, but I didn't notice which model. It went right on, about five minutes a side. Cost about twenty dollars each. | ||
| R2s |
I put on the XB12R pegs. They don't have a 1" drop. They worked out great, and no rubber insert. | ||
| Xring60 |
We've got them, they're not quite as cheap as the stockers but if you want traction and a large flat foot area then... We don't see many track days up here in Montana but these pegs are super comfortable on the street! http://www.preeng.com/xcart/product.php?productid= 26&cat=7&page=1 |
