G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Locobueller Posted on Sunday, April 12, 2009 - 09:54 pm:        The low fuel light indicator remains on even with a full tank. Manual says to remove swingarm, rear wheel, drain oil and fuel to get to the fuel sensor and that I need a special tool. Is there an easier way? Thanks Loco Bueller   Greenman44 Posted on Monday, April 13, 2009 - 08:46 pm:        I believe there is a way to pull the fuell pump without pulling all the other BS off. I saw something about pulling the fuel pump to fix the wires. I'm not sure where the fuel sensor is, but search around to see how to remove the pump if you need to do this. Shawn   Roycet4 Posted on Wednesday, December 02, 2009 - 02:35 pm:        My son's '06 XB9 has this same issue. Somewhere someone wrote up a great article on how to pull the pump and fix a connector for the fuel level float switch. I found a great post on how to pull the pump out and check for nicked wires (post was about blowing ignition fuse)I tried searching but could not find the post. Can anyone "point" the way?? Thanks Royce

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: