G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through April 13, 2009 » Rear exhaust header access? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Number01
Posted on Sunday, April 12, 2009 - 07:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

how hard is it to gain access to the studs on the rear cylinders exhaust port. I've heard that it requires you to rotate the engine forward on it mounts! Is this true? What tools would be needed for this job? I have a dent in my rear header pipe from a previous owner and thought about replacing them.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xb1200rick
Posted on Sunday, April 12, 2009 - 08:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I just did that today, it was not too bad . lots of info here
http://www.badweatherbikers.com/buell/messages/327 77/449660.html?1238926578
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Sunday, April 12, 2009 - 08:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

i got mine off with a 3/8 universal joint (a 'wobblie' socket would work too). or to make it even easier, use a 1/4 inch drive. either way make sure to lube it up a day in advance with some PB blaster so you don't snap a stud and kick your self for it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Petebueller
Posted on Monday, April 13, 2009 - 07:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Hi 01

This may be helpful

http://www.badweatherbikers.com/buell/messages/327 77/401068.html

Pete
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration