G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through April 13, 2009 » Turn signals as running / brake lights... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Sifo
Posted on Sunday, April 05, 2009 - 07:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I'm hoping the video works, but I just finished a project converting my turn signals into running and break lights.


This was done with a unit from Kuryakyn. Installation was pretty straight forward but did not provide anything to turn the turn signals red. I solved this with a product from my wife's friend that is used for tinting glass to look like stained glass. The label was gone so I don't know the name of the product, but she got it from a stained glass shop. I simply brushed it on the stock amber lenses and now they're red! The kit allows for flashing when the brake is applied, but it seemed a bit confusing when you signal and break and all three lights are flashing at different rates for a second or so.

Just a bit off topic, but I found this when I was getting the Panacea light system for the wife's sporty. If you haven't seen that set up, let me just say that it is as impressive as it is expensive. It was a pain to get tucked away in the sporty though. I thought the XB was lacking in space for add on electronics!
Top of pagePrevious messageNext messageBottom of page Link to this message

Piotr12
Posted on Sunday, April 05, 2009 - 07:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Very nice!

One question: Is it a must to integrate the kit into the brake light? I would convert my rear turn signals to running lights but install a separate modulator for the brake light. Is this possible?
Top of pagePrevious messageNext messageBottom of page Link to this message

Sifo
Posted on Sunday, April 05, 2009 - 08:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I think you could just wire in a flasher down stream of the Kuryakyn unit. I may just try that.
Top of pagePrevious messageNext messageBottom of page Link to this message

Piotr12
Posted on Sunday, April 05, 2009 - 08:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Sweet, I will keep an eye out for the results.
Top of pagePrevious messageNext messageBottom of page Link to this message

Aldaytona
Posted on Sunday, April 05, 2009 - 10:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

The very 1st thing I do to any bike I get is to convert the rear turn signals into additional tail lights along with the turn feature. It's quite simple, change the sockets from 1156 to 1157 so the light accepts a dual filament bulb and about 1' of wire to splice into the tail light wire. On the Buells I used a red LED 1157 bulb and left out the inner amber lens.
BTW if you want to highlight the brake light feature in the original assembly, install a Signal Dynamics "Back Off" brake light module, it's a 1 wire installation as well.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nik
Posted on Monday, April 06, 2009 - 03:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I used testor's candy red model paint for my rear inner lenses, when I converted them to running lights with relays.
Top of pagePrevious messageNext messageBottom of page Link to this message

Sifo
Posted on Monday, April 06, 2009 - 01:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

So I had a Rear Alert flasher from Ebay looking for a home so I hooked it up down stream of the Kuryakyn unit. It works fine and is less confusing that the way the Kuryakyn unit flashes the turn signals. With the Kuryakyn unit when you turn on the right signal then brake before the turn left signal would flash with the brake light. It just didn't seem right to me and this is working the way I had hoped for.



To do it over I would probably go the route that Aldaytona described. Do auto parts stores carry generic light sockets that can be swapped out like that?

So many ways to skin a cat, and so many cats to skin!
Top of pagePrevious messageNext messageBottom of page Link to this message

Piotr12
Posted on Monday, April 06, 2009 - 03:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Tits! I love it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Mikef5000
Posted on Monday, April 06, 2009 - 11:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I simply used 2 standard relays to turn my signals into running lights / turn signals. They don't have anything to do with the brake lights... but it makes them on full brightness 100% of the time, and when you hit the signal button that one blinks off. (As opposed to OEM when they are off all the time, and then blink on)

They work GREAT!
Top of pagePrevious messageNext messageBottom of page Link to this message

Valiant_duke
Posted on Tuesday, April 07, 2009 - 02:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

That is honestly just nice/cool.
Really like it.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration