| Author | Message | ||
     Ridenusa4l |
guys i just got the ecm cable where do i connect it to the ecm???? Thanx Jake | ||
| Endoman33 |
sitting on the bike, the left side radiator cover look behind it, there should be a grey plug in connector, some of the 1125r's the connector is slide up near the cyclinders should be easy to spot | ||
| Ridenusa4l |
i tried one of the connectors but the plug was to big on the cable, heres a pic can u circle where it is possibley???  THANK YOU SO MUCH!!!! Jake | ||
| Skylerxb12r |
Jake, the connector cant be seen in your pic. look at the area where the cylinders meet, it should be tucked within a 6" or so radius of that area. Its not under the radiator cowl if thats where you are looking. More in the lower right area of your pic and under the radiator. Hope that didn't muddy the water too much... | ||
| Ridenusa4l |
Thanks guys i found it, i was looking in all the wrong places lol, its to damn windy to plug it in tonight or else i would... THANX A MILLION Jake | ||
| Ridenusa4l |
hey guys one more question, how exactly do i get my info into ecmspy once everything is connected?? Thanx Jake | ||
| Endoman33 |
that I'm not sure about look fo xb9 he would know for sure | ||
| Skylerxb12r |
Jake, When you have ECM spy up and running click the EEPROM tab. You will then click the fetch EEPROM button (key and ignition switch on) and you should see some numbers scrolling at the bottom of the window as the Hex table is fetched. When finished you will have a large table of hex values appear, theres your info! | ||
| Zac4mac |
Definitely download and SAVE the stock EEPROM data. Failure to do so WILL cost you a trip to your dealer for an ECM reflash. Z | ||
| Ridenusa4l |
thank you SO MUCH guys... zac i just save the stock programming on ecmspy correct??? THANKS A BILLION Jake | ||
| Ridenusa4l |
well guys i have done everything, but it keeps saying i got an NAK any ideas on how to fix that??? Thanx Jake | ||
| Ridenusa4l |
nevermind...i got-r-done  Jake |
