| Author | Message | ||
     Ulywife |
From Jlnance: - Throttle cables & wiring harness shield. Affects early 06 The forks bang on the throttle cables and wiring harness at full left lock. A guard was added to protect the wiring harness in 07. It also seems to protect the throttle cables even though they are not directly covered by it. The 07 guard will retrofit onto an 06. It is a little difficult to order as it is not shown in the exploded parts diagram in the 07 parts book. It is listed in the parts list on the facing page. Part# Y1000.2AK (Message edited by Ulywife on March 11, 2009) | ||
| Xbimmer |
'07> Guide, wire harness, Part# Y1000.2AK | ||
| Mnrider |
Mine built in May 06 has the new cable-harness guide with the forms that cover the cables,I bought it new in oct.so I don't know if it came with it or if the dealer put it on under some program or recall.So am I right in thinking the one with the cable guide is the updated one. | ||
| Jlnance |
Yes, you're good with the cable guide. The original bikes did not have one at all. | ||
| Babired |
Thank you for the advise I have 2 big trips this year and if I can do any prevenative maintenance I will. I already had the connector melt on me on a trip last year that was stressful K | ||
| Tginnh |
Throttle cables & wiring harness shield. Affects 06 The forks bang on the throttle cables and wiring harness at full left lock. A guard was added to protect the wiring harness in 07. It also seems to protect the throttle cables even though they are not directly covered by it. The 07 guard will retrofit onto an 06. It is a little difficult to order as it is not shown in the exploded parts diagram in the 07 parts book. It is listed in the parts list on the facing page. Part# Y1000.2AK Can someone please post a photo of the guard? I haven't seen one. Thanks. | ||
| Jlnance |
 | ||
| Wolfridgerider |
Good info....I need to do a few thing to my Uly.... Gotta get one of them cable cover thingy's | ||
| Tginnh |
Thanks Jlnance. I'm glad I asked - that's a lot more guard than I expected. Does it wrap around or slip over? If it slips over, how much wiring needs to be disconnected to install it? | ||
| Jlnance |
Tginnh, I don't know the details, I had the dealer install it. It has bolt holes, I assume you remove the 2 bolts visible in the photo and fasten it with them. | ||
| Ratbuell |
OK, I'm cornfuzed about the cable guide. My '06 - purchased as a leftover last April (08), has a cable guard. Was that a tech bulletin or something? Or did some have it / some didn't? I'd have to check my build date... I was getting ready to upgrade it though, and it looks just like the ones on our new '09s. <shrug> | ||
| Jlnance |
Ratbuell - It appears they started putting the guards on sometime in the 06 model year. My Oct 05 built Uly did not have one. | ||
| Arcticktm |
the cable/harness guard bolt over the harness/cable, it is an easy add without messing with any harness or cable. My June 2006 Uly came with one already on it. | ||
| Imaposer |
can anyone tell me where i can buy this? new uly owner, and neither this or the clutch cable bracket have been updated. the clutch one is available from american sportbike, this isn't. |
