G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jjk Posted on Saturday, February 21, 2009 - 12:06 pm:        Can someone please post a picture of where the can gets placed and where the return hose goes into the throttle body? Thank you! John   Froggy Posted on Saturday, February 21, 2009 - 01:02 pm:        I got mine waiting to go on, I should do it this weekend, I will figure it out and take pics   Jjk Posted on Saturday, February 21, 2009 - 01:04 pm:        Thanks, Froggy - I foolishly took it all apart this morning and now can't figure out how to install the new can and vent hose!   Froggy Posted on Saturday, February 21, 2009 - 01:25 pm:        Just looking it over in the service manual it looked simple enough, take the fuel vent line, connect it to the hole for it, then run the line from "carb" hole to the throttle body, bolt everything down to the frame and call it a day. We shall see.   Jjk Posted on Saturday, February 21, 2009 - 01:31 pm:        Hey Froggy - thank you for the reply. I'm not seeing where the line into the throttle body actually attaches/mounts/rests? Any guidance in the manual? Thank you. John   Froggy Posted on Saturday, February 21, 2009 - 01:39 pm:        Check in the service manual, there is a picture of it in my Uly book. I don't know what it looks like on the 1125 throttle body.   Jjk Posted on Saturday, February 21, 2009 - 01:43 pm:        If only I had a service manual . . .   Cobradave93 Posted on Saturday, February 21, 2009 - 03:57 pm:        I just put mine on last weekend and had the same question because I also do not have a service manual. I took off the throttle bodies and the only fitting I found was on the front throttle body at the left side. It was a brass fitting with a plug. If someone has a service manual to check this, please do because I haven't started the bike since the install (waiting to get my muffler finished). It should be right because it was the only place for it.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: