| Author | Message | ||
     Got_jack |
im in the process of gettin some parts power coated and i want to wrinkle finish the primary how much of a pain is it to take it off also same with the trees is it a big deal to take off or no? | ||
| Skinstains |
It's all easy. Do you have a manual, tools, and a stand ? | ||
| Got_jack |
tools yes,manual nope,if the job is easy ill buy a stand from sears $100 | ||
| Ochoa0042 |
I think the problem with the t-trees is getting everything back on at the right specs.. torque, balance, height.... .... you might as well get new bearings .... Q: do you have to drain the gas to take off the t-trees? | ||
| Lonexb |
Q: do you have to drain the gas to take off the t-trees? no | ||
| Got_jack |
ok so i got the primary off today alitlle bit of a pain i just forgot to turn that screw clockwise to release the clutch cable. now i started on the trees but broke the allen key so im gonna have to get a new one tomarrow now u guys have any ideas the easiest way to get them off | ||
| Skinstains |
Dude, Slow down ! I'm in Jersey and can drop by and assist you. I don't have a manual for you particular bike. If you get someone here to post the torques for the front end we can take care of it properly. I have books for 05 12R and 09 12X and immagine the primary torques are the same. PM me and we'll set up a date and time for me to roll over and take care of this. I have all the tools you need just let me know what you need. |
