| Author |
Message |
    
Jersey_thunder
| | Posted on Tuesday, February 03, 2009 - 06:00 pm: | 
|
DAM |
Krassh
| | Posted on Tuesday, February 03, 2009 - 06:42 pm: |
|
Unless you or someone designs an adjustable idler for chain conversion. Biggest problem is without an adjustable idler there is no way to take up the slack of the chain unless you get the Buell racing swingarm which is adjustable back at the axle. |
Jersey_thunder
| | Posted on Tuesday, February 03, 2009 - 07:21 pm: |
|
anyone have a pic of the chain swing arm?
jt |
Krassh
| | Posted on Tuesday, February 03, 2009 - 07:37 pm: |
|
Here you go pics of Shawn Higbee's race bike with the Buell Chain Conversion Swingarm.
http://www.badweatherbikers.com/buell/messages/290 431/362680.html |
Jersey_thunder
| | Posted on Tuesday, February 03, 2009 - 08:07 pm: |
|
thanks man, just what i need to see
JT |
Zac4mac
| | Posted on Tuesday, February 03, 2009 - 10:28 pm: |
|
Take a look at what Pete at Grandstand has for XBs.
A rumor was floating here that one is in the works for the 11.
It's an adjustable eccentric, I believe they have a patent on it.
Z |
Duggram
| | Posted on Tuesday, February 03, 2009 - 10:37 pm: |
|
Call Pete. He'll tell you about the 1125. I ask about it frequently. I think the problem is that he is really busy, and it takes a lot of time to get something like this into production. But if you call and pester him, he will at least know there's interest in it. |
Jersey_thunder
| | Posted on Wednesday, February 04, 2009 - 09:19 am: |
|
chain and sprocket will bolt on...no way to adjust? correct?...HMMMMMM?
JT |
Buellrcr
| | Posted on Wednesday, February 04, 2009 - 12:41 pm: |
|
buell chain converson, replaces the left side rear set to put a idler sprocket . a xb idler wont work on the 1125 dose not bolt up the same way |
Hooliagn
| | Posted on Wednesday, February 04, 2009 - 12:46 pm: |
|
Don't forget about the cush drive being on the front sprocket. |
Anonymous
| | Posted on Thursday, February 05, 2009 - 05:40 pm: |
|
will buell is comeing out with a full exhaust,for the 1125 but it is race use only, and it is not going to be cheap some where between 1500 and 2000 bucks |
Jerry_haughton
| | Posted on Thursday, February 05, 2009 - 06:17 pm: |
|
Anon, i appreciate your participation on BadWeB, but posting anonymously is reserved for "special" instances or occasions, and unless you're on "The List," permission to post anonymously usually needs to be secured from Admin prior to the post.
please drop me or one of the other Admins a PM if you want to continue to post as Anon, explaining why you need to do so.
thx again for your participation here on BadWeB. 
Ferris, janitor |
Easyrider
| | Posted on Sunday, February 08, 2009 - 02:01 am: |
|
Anonymous,
Any HP and Torque dyno sheets available to see the difference with the stock setup, and what it is doing with the powerband. |
|
