| Author | Message | ||
     Firemanjim |
Dyna 2000 HD1EP ignition module with Dyna programming kit and single fire coil,used on Bonneville bike for 2 seasons,great shape.7 wire connector(early Buell) would need adapter from Dyna for 7-8 wire.125.00 Race air cleaner base with tall stand-offs and spacer---- 20.00 Homemade alum A/C base w/stand-offs and alum cover,has tall K&N that took a hit.10 One set of Buell yellow plug wires 10.00 Set of stock cams IIRC from M-2, 20.00 Black S/E air cleaner insert,new. 10.00 3 sets of air cleaner stand-offs for Race air cleaners 1.00 set. Big 3" inlet Supertrapp,new in box. 100.00 Stock pushrods Ignition switch,no key.5.00 And a new find, set of S-2 throttle cables,speedo cable,and new clutch cable. 50.00 (Message edited by firemanjim on January 28, 2009) (Message edited by firemanjim on February 06, 2009) | ||
| Firemanjim |
     | ||
| Easy_rider |
I'll take the shifter and the grills. | ||
| Brinnutz |
I might take that Mikuni off your hands. Can I see some pics Jim? Thanks | ||
| Mr_wizard |
Is the shifter still available? If easy rider doesn't take it let me know | ||
| Sleez |
jim, i want the muffler but don't have the cash this month, if you aren't in a hurry i'll take it some time next??? | ||
| Firemanjim |
No hurry,Lee.This is a big one,5" round,3" inlet,18" long. Easy gots shifter and grills. Brin got carb--will get pic tomorrow as it is at shop with A/C stuff. Need money to buy more stuff for racebike--need electric water pump at 200 and a nice alum plenum from Procharger at 300,clutch cable and lever,etc etc etc. | ||
| Brinnutz |
Roger that Jim. I'll let you know when I see the carb. What do you need to mount the Race Air Cleaner to the Mikuni? | ||
| Sleez |
thanks jim, i want it for my truck!!! | ||
| S2pengy |
Jim I would like to see pics of both air cleaner bases.... Something that I have been looking for.. | ||
| Firemanjim |
OK, more stuff and pics. Set of stock pusrods. 10.00 S-1 kickstand, chromed, 40.00 Choke cable setup,was in engine fire,works but plastic handle is melted,2.00 Stock S-2 K&N filter 2.00       (Message edited by firemanjim on February 06, 2009) | ||
| Brinnutz |
Jim, Should I just paypal you an extra $4.00 for the orange wires? I want the kickstand too, but I'm running wayyyyy low on money. Spent a lot on the Buell the past month, and the damn thing isn't ridable, and probably won't be for a long time. I wish I had help to work on this f'in thing, I need experience and tools. (Message edited by brinnutz on January 30, 2009) | ||
| Firemanjim |
Too bad you are not closer. We are having another week of 60-70 degree days and I have lots of tuber experience.What are you doing? | ||
| S2pengy |
Jim Pass on the Air cleaner parts but I would like the oil tank, if I am the first... | ||
| Firemanjim |
You are,send me your address and I'll get it packed to go with the other stuff. Wilson,I'll toss em in with the rest and you can buy me a beer. | ||
| Brinnutz |
Roger that sir. | ||
| Buellerthanyou |
FMJ, Howdy from Austin! I'd like the billet swingarm ends, if they're still available. How much for shipping? I can paypal you... Jay | ||
| Firemanjim |
Jay,I'll toss em in an envelope, should only be a couple bucks. | ||
| Buellerthanyou |
Sounds good. I'll PM you my address and I need your Paypal address to send the money. Thanks, Jay | ||
| Sleez |
hey jim, i'll have to pass for now on the trapp, i found some other buell parts i had to have! a corbin solo seat and tail for the S1W for 100.00, the seat needs to be recovered and the tail needs paint but is otherwise ok. if you still have the trapp by the time i get some more extra cash, i'll take it. sorry. by the way, how's the knee coming along? lee | ||
| Buellsrule |
Jim, I'm interested in the 'trapp. Is this for some other application than a Buell? Looks big. Will it fit my S3 or X1? Thanks, Frank. | ||
| Sleez |
frank, it has a 3" inlet, so it's .5 inch bigger, plus the body is larger than most buell types. it might work with a custom elbow and mounting. i was hoping to use it on my truck! i am getting other stuff, so i step aside for now. lee | ||
| Firemanjim |
Sent out shifter, carb, starter,billet adjuster caps, and oil tank this morning,thanks guys. | ||
| Firemanjim |
Dyna 2000 HD1EP ignition module with Dyna programming kit and single fire coil,used on Bonneville bike for 2 seasons,great shape.7 wire connector(early Buell) would need adapter from Dyna for 7-8 wire.125.00 Race air cleaner base with tall stand-offs and spacer---- 20.00 Homemade alum A/C base w/stand-offs and alum cover,has tall K&N that took a hit.10 One set of Buell yellow plug wires 10.00 Set of stock cams IIRC from M-2, 20.00 Black S/E air cleaner insert,new. 10.00 3 sets of air cleaner stand-offs for Race air cleaners 1.00 set. Big 3" inlet Supertrapp,new in box. 100.00 Ignition switch,no key.5.00 Set of stock pusrods. 10.00 S-1 kickstand, chromed, 40.00 Choke cable setup,was in engine fire,works but plastic handle is melted,2.00 Stock S-2 K&N filter 2.00 Stock S-2 muffler, 10.00 And a new find, set of S-2 throttle cables,speedo cable,and new clutch cable. 50.00 (Message edited by firemanjim on February 06, 2009) | ||
| Bluzm2 |
Jim, I'll take the S2 cables. Paypal OK? Let me know how much for postage etc.. Brad | ||
| Thunderhead |
will the air cleaner base and filter fit a 99 s-3 with fuel injection and air intake temp sensor? |
