Author |
Message |
Ustorque
| Posted on Thursday, January 01, 2009 - 07:28 pm: |
|
can anyone get me a part # for '06 xb9 exhaust port gasket. also if anyone has a pic of a new one that would really help. thanks guys |
Slaughter
| Posted on Thursday, January 01, 2009 - 07:47 pm: |
|
Using one for stock pipes or aftermarket? Stock gasket works pretty well in most cases but the Screaming Eagle gaskets work better with some pipes (like the Beson) Should be able to find it by googling. My parts book is not going to be in my hands again until Monday. |
Slaughter
| Posted on Thursday, January 01, 2009 - 07:50 pm: |
|
The SE gasket part number is 17048-98 (what I use) Don't know the stock part number but Al has them at American Sport Bike. http://www.americansportbike.com/shoponline/ccp0-prodshow/5931.html (Message edited by slaughter on January 01, 2009) |
Ustorque
| Posted on Thursday, January 01, 2009 - 07:53 pm: |
|
stock header i try not to give money to my local HD stealership(they suck), so i picked up some gaskets at and independent HD repair shop near my house, but they are very different than the stock ones that were in there. not sure if they will work. |
Slaughter
| Posted on Thursday, January 01, 2009 - 07:54 pm: |
|
The Screaming Eagle have a square cross-section. The stockers have a tapered ID. (Pic of stock gaskets on Al's website) |
Ustorque
| Posted on Thursday, January 01, 2009 - 07:55 pm: |
|
thanks slaughter |
Ustorque
| Posted on Thursday, January 01, 2009 - 07:59 pm: |
|
ah ha, thanks for that slaughter, al's pics explained it all. the guy gave me the SE flat type, his reason for that choice was there is less chance in to much compression of the gasket and less blockage of the exhaust port. thanks again for the help |
|