| Author | Message | ||
     Buelliedan |
I am keeping the swingarm and the complete engine. everything else is available. If you need something let me know. sales@nrhsperformance.com tel # 303-702-1600 | ||
| Brinnutz |
chop chop chop, lol. handlebar top clamp (with bolts) for gauges, seat screw (fully assembly with retaining clips and such to hold in place). That shouldn't be to expensive, right? Any axle covers/chrome bezels/fancy add-ons? | ||
| Firstbuell |
I need the tailpiece - what color? condition? & a rear brake caliper, too | ||
| Buelled |
I need the mirrors,front brake line if braided s/s the factory one is ok.the tubes on the front end mine rusted.nuetral safety switch,fuel tank hold down bolt,and battery tray holding strap.after it was stolen but found down the street and a terrible bike shop that tried to rip me off then they couldn't find the parts after they worked on it.well basiclly tried to put a mecahnics lien on it. (Message edited by buelled on November 22, 2008) | ||
| Halffast |
How much for the frame? title included? Thanks | ||
| Buelliedan |
Frame has no title as it is staying with the engine. Still want it? Handlebar top clamp with bolts would be $15 plus shipping. I have factory dual gauges(tach and speedo)along with the idiot light and the black plastic guage holder available with wiring for $110. Tailpiece is black and in excelllent condition as it was only used for about 1,000 miles. Price is $150 Seat is also in excellent condition. Price is $50 Rear brake caliper would be $40 Buelld- I will sell you all those parts you were asking for except the netral safety switch for $30 all prices plus shipping | ||
| Slc4me |
I want the forks wheels and headlight assembly how much? | ||
| Buelliedan |
Forks, wheels, and headlight assembly would be $700. The forks have the Buell race springs installed in them. The grey wheels have brand new bearings ($85) front and rear from American Sport Bike. If you want like new Shinko tires already installed on the wheels add another $150. | ||
| Jayvee |
I need just the threaded rod that activates the rear brake. If it's too inconvenient I would consider to just buy the rear master cylinder? What would you ask for just the rod, vs. the whole master cylinder with it? Thanks. | ||
| Buelliedan |
Complete master cylinder with brake lever would be $40 | ||
| Brinnutz |
Dan, How much for just the seat screw? I have enough seats, but I lost my 3rd seat screw and need a new one. Thanks, I found my other handlebar clamp, so I won't need that. but the seat screw with all retaining washers is what I really need. Thanks | ||
| Phelan |
nutz, you should take one of the screws to the local Lowes and look for a handful of extras. Home Depot rarely has the misc. nuts and bolts I need, but Lowes has rarely let me down. | ||
| Brinnutz |
I went to Lowe's to get one when it fell off in middle of a ride. They didn't have the right one but had to "make" one fit to work, it's ugly. | ||
| Eshardball |
What front rotor do you have and what do you want for it? | ||
| Phelan |
Yeah, my apologies. I went to Lowes today to get some bodywork screws for my S2 and they didn't have what I needed either. | ||
| Phelan |
What shock is on it, and how much? I need one.. | ||
| Buelliedan |
Has the 2000 and up front rotor.(the good one) It is in good shape. Will sell for $100 Ross, I have an older long shock with the resevoir I will sell for $75. I will sell the seat screw with the retainer for $5 | ||
| Brinnutz |
Dan, Let me know your paypal addy. Does that $5 include the shipping? That can't be more than a couple of bucks. | ||
| Malott442 |
Handlebars? Belt drive setup? Exhaust (header and muffler)? | ||
| Buelliedan |
Briannutz, No shipping would be another $3 for first class in a padded envelope. that would be $8 total. My paypal adress is: susan@nrhsperformance.com make sure to put in the notes section what you are buying. | ||
| Buelliedan |
I actually have 3 sets of handlebars available. 2 regular height which would be $40 each 1 S3T touring bars which would be $50 each Belt drive set-up is not for sale at this time. The exhaust is a Buell race pipe in very good condition. That I want $350 for. | ||
| Buelliedan |
Just an FYI, I have been buying and selling Buells and Buell parts for a long time folks. Don't insult me with ridiculous offers. I know what this stuff will go for on e-bay. I might be willing to go a little less to help out some folks here but there are limits. | ||
| Malott442 |
so a 38 dollar offer for the whole bike would be innappropriate? No way! Ha ha, these are great prices, but there will always be a low baller......... Just an off question..... You recently part out an s1? I'm looking for a tail and seat.... | ||
| Buelliedan |
Mallott, We do have a custom painted S1 tail section available. It is black with real flames done by a pro painter here for one of our race bikes. It does have a HD dealers name on it but it looks very trick. Price would be $250 with seat included. | ||
| Phelan |
Matt, the tail does look pretty trick. It is from Dan Norlin's ADRHA S1 that he blew up. | ||
| Malott442 |
wish i could afford it. I'm looking for rough condition...... |
