| Author | Message | ||
     Fastco |
This is a bike I bought for a project some time back - rode it as a complete S3T for a bit, and it ran good and strong, started easy, sounded great and did not leak - the only issue I had was a tick in the valve train - once the bike was tore down I opened the cylinders...found the cause of the tick was a bent pushrod -bought a set of new, Crane adjustable pushrods... that was about as far as I got on the project, life and a wife kept me occupied on other things. The motor/trans is loose out of the frame and well-sealed, the heads and other value train parts are boxed. I have the frame which matches the numbers on the motor and clean title for above. Also includes a swingarm, oil tank, and a few other misc pieces - figured I'd put it up here to see if there is any interest prior to going to e-gay with it; serious, reasonable offers; I do not HAVE to sell this, I'd like to. | ||
| Buelliedan |
what do you consider a reasonable offer? In this economy $500 might be very reasonable. | ||
| Fastco |
Might be??? Dang Dan! does that mean you'd part with all the same pieces from the bike you are parting out for that same kind of money??? - I'll be right there with cash in hand! - Seriously, anything less than about $1,300 and I can wait it out; there are no-paper ironheads bringing $800+ and 1200 Sporty motors bringing $1,000 right now in "this" economy | ||
| Slc4me |
Where are you located I am very very interested | ||
| Buelliedan |
Thats why I asked. You should always put your price in an add like this to avoid folks like me making ridiculous offers. By the way, changed my mind, not selling my X1. | ||
| Mm128 |
Post a pic of everything if you can. Matt. | ||
| Fastco |
some pics;     | ||
| Slc4me |
Where are you located? | ||
| Fastco |
I'm in Kingsport, TN - Very near Bristol Motor Speedway - Northeastern corner of the state - I will arrange shipping when possible. | ||
| Fastco |
bump |
