Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, November 04, 2008 - 07:10 am: |
|
Has anyone used this muffler on the Uly? MagnaFlow 11148 ($78.00 at Summmit Racing) LINK:http://store.summitracing.com/partdetail.asp?part= mpe-11148
Brand: MagnaFlow Product Line: MagnaFlow Performance Mufflers Part Type: Mufflers Part Number: MPE-11148 Case Shape: Oval Inlet Diameter (in): 2.250 in. Inlet Quantity: Single Inlet Location: Center Outlet Diameter (in): 2.000 in. Outlet Quantity: Dual Outlet Location: Center Internal Construction: Perforated stainless tube with packing Muffler Material: Stainless steel Muffler Finish: Natural Case Length (in): 14.000 in. Overall Length (in): 20.000 in. Thickness (in): 3.500 in. Width (in): 7.000 in. Outlet Style: Standard, without tip Quantity: Sold individually. Notes: Reversible for custom installation. Muffler, 2.25 in. Inlet/Dual 2 in. Outlet, Stainless Steel, Natural, Each |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Conchop
| Posted on Tuesday, November 04, 2008 - 08:13 am: |
|
Very good question? I've been looking at this also. I would prefer a Drummer, but the stainless has a large waiting list. Lets see what happens. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, November 04, 2008 - 08:18 am: |
|
""Very good question? I've been looking at this also."" There's a really good custom header/muffler fab shop close by ... I'm thinking under 200 total, should do it. Might be a good winter project. John |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Nyeguy
| Posted on Tuesday, November 04, 2008 - 08:21 pm: |
|
Too bad you'll get people tellin you it will kill your performance! I think its a great idea and am lookin into it. A muffler can only be made so many ways and i'm certainly not gonna spend 400 bucks on someone re doin my muffler! I've chopped mine up 3 or 4 times and had sucess in achieving my goals(more sound and sotp power)If you think drummers reworking of your muffler is a big difference between a magnaflow you'd be wrong! Maybe slight because of dyno time but a glass pack is a glass pack...roughly |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cycletlh
| Posted on Tuesday, November 04, 2008 - 08:46 pm: |
|
Looks similar to a Latus muffler. It used a flowmaster muffler. My wifes xb9 had one on it. Ran good and sounded cool. I did not like the noise on long rides but the wife did. The stock 9's don't have the valve. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Etennuly
| Posted on Wednesday, November 05, 2008 - 12:21 am: |
|
I don't see why it wouldn't work. Really all you would need is a custom elbow to get the exhaust in and tips to get it out. Maybe a little modification on the clamping(shape a spacer or something). If I was into more noise(got tired of it on my City-X) I was thinking a true Cherry Bomb would be cool. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Lousirider
| Posted on Friday, November 07, 2008 - 06:00 am: |
|
soo...Johnny, since you brought this idea up, you should be the first to try it..and...uh..let us know, right?![](http://www.badweatherbikers.com/buell/clipart/coolgrin.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Friday, November 07, 2008 - 10:58 am: |
|
""soo...Johnny, since you brought this idea up, you should be the first to try it..and...uh..let us know, right?"" Okay! It's a deal. A good wintewr project! I'll need some good installed photos of the SS Drummer and that $350 muffler that American Sport Bike sells to see how they are mounted. Then I'll get with the fabricator here and ultimately post specs and drawings for all of us. Any suggestions on mounting it will be appreciated. I live 30min. from Summit Racing, so I can pick it up this weekend. . |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Groundpounder
| Posted on Friday, November 07, 2008 - 12:09 pm: |
|
I think you're on to something and I might be right behind you. I have thought about experimenting with this muffler as well. Definitely keep us posted on the progress, and any problems you encounter. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Friday, November 07, 2008 - 04:17 pm: |
|
Good News! I took off half a day and stopped in to Mac Automotive in Boardman, Ohio. They do custom headers for race cars, funny cars, etc. Shaun, the owner, said he would build me a custom exhaust for the Uly (with the MagnaFlow 11148) for $150 (total with muffler and labor) out of stainless and that included the rear tips (side exit) . (Message edited by johnboy777 on November 07, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Dennis_c
| Posted on Friday, November 07, 2008 - 05:04 pm: |
|
Johnboy tell Shaun to keep the pattern I might get one to. You can test it for me and let everyone know how it workes. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Saturday, November 08, 2008 - 08:07 am: |
|
"Johnboy tell Shaun to keep the pattern I might get one to. You can test it for me and let everyone know how it workes." Right, Once he makes one, if it works well, he can make more. EDIT: Where can I get the side-exit (2") tips for this muffler. John (Message edited by johnboy777 on November 08, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Saturday, November 08, 2008 - 08:35 am: |
|
found these photos on Buelletinboard--thanks gbalias, for their use:
![](http://pbalias.smugmug.com/photos/370544098_C9XnU-S.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Saturday, November 08, 2008 - 08:39 am: |
|
Here's the MagnaFlow LINK to the forum thread on BuelletinBoard: http://www.buelletinboard.com/forums/showthread.ph p?t=7138&highlight=magnaflow . |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, November 11, 2008 - 12:33 pm: |
|
Ordered the MagnaFlow 11148 from Summit Racing Monday ($94.00 shipped) ... turns out its a special order piece that gets dropped shipped to the house. Looks like I can use the stock rear muffler straps (seems others have done so), but I'll need an elbow of some sort. I don't know, as of yet, if I can use the front straps, as well. Time will tell. If not, I will need a bracket on the elbow, ala Jardine. I think I might even do a step-by-frigging-step photo how-to guide too (thoses are so fun to read - very informative, as well) ....yeah, right! I'm way too lazy for that. . (Message edited by johnboy777 on November 11, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Lousirider
| Posted on Tuesday, November 11, 2008 - 01:55 pm: |
|
I think I might even do a step-by-frigging-step photo how-to guide too
thanks in advance for the S-B-F-S guide..![](http://www.badweatherbikers.com/buell/clipart/biggrin2.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Lousirider
| Posted on Monday, November 17, 2008 - 12:07 pm: |
|
any info on this install yet, JB? I going to check with my local muffler shop to see if they have this...I'm really interested in this mod. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Monday, November 17, 2008 - 12:48 pm: |
|
""any info on this install yet, JB? I going to check with my local muffler shop to see if they have this...I'm really interested in this mod."" Sorry, Lousirider, for the delay. I'm still waiting to receive the MagnaFlow 11148 from MagnaFlow. As I understand it, from Summit Racing, this is a special order item, that gets dropped shipped to my door. Order was place last Monday. I just now ordered a elbow/bracket as well, from a private vendor, so I need that as well. More on that later, too. Also, I need to order a few torca clamps as well (S0127.8), I guess. LINK: http://chicagoharley.com/shop/advanced_search_resu lt.php?keywords=s0127.8&osCsid=b64f91360b2f04bb3b2 051ce1cc1cb4a&x=29&y=13 I'll do a write-up once get everything and put it together.... it all seems rather straightforward at first blush. The rear straps (S0116.02A8A) can be re-used but a front connector/bracket is required to hold the front, as the muffler is shorter than the stock or race can (a good Muffler shop can fab this up)... I'll take good photos, etc., of all of this for us, so those interested can replicate. My goal is a mellow sounding muffler, louder than stock but quieter than the Drummer can, which to me is just waaay too loud to my way of thinking. John |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Hughlysses
| Posted on Monday, November 17, 2008 - 01:48 pm: |
|
My goal is a mellow sounding muffler, louder than stock but quieter than the Drummer can, which to me is just waaay too loud to my way of thinking. If you achieve that goal without a performance loss, people will be lining up to try it. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Lousirider
| Posted on Monday, November 17, 2008 - 02:14 pm: |
|
Sorry, Lousirider, for the delay. no prob. I forgot this was special order..good luck...cant wait for the results. James |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Monday, November 17, 2008 - 03:47 pm: |
|
As luck would have it, big brown dropped it off this afternoon. It shipped from Oceanside, CA ... got it in 8 days. MagnaFlow 11148 - $77 plus shipping from Summit Racing. Here's the Length Shot (14" Long/ Width is 7" plus)
The Inlet Length
And two Interior Shots- it's a straight-thru design that splits into two 2" outlets!
The good news is it has Stainless Steel matting - no repacking needed. John . (Message edited by johnboy777 on November 17, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bertotti
| Posted on Monday, November 17, 2008 - 11:11 pm: |
|
Is it tuff enough to be a jack point? And how the heck can a pipe that goes straight through be quiet? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Natexlh1000
| Posted on Tuesday, November 18, 2008 - 06:36 am: |
|
It will be more quiet than straight pipes. How much more quiet? perhaps we shall see. I am watching this thread closely. I want to see how the inlet is adapted ![: )](http://www.badweatherbikers.com/buell/clipart/happy.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, November 18, 2008 - 01:28 pm: |
|
Here's the type of elbow-bracket I'm after:
With regard to noise, you can reduce the outlet dia. (and so the noise level to some extent) by installing collars in each outlet pipe (a la Jardine's Quiet Collar). The outlets are 2" ... if I install 1.5" collars inside both outlets, that will (according to my pathetic math and questionable reasoning based solely on area and an inlet dia. of 2.25" from the headers...) reduce the flow by about 14% or so. A good place to start it seems, if its too loud, initially. I think the collars could be a good way to increase or decrease back-pressure too - with some trial-and-error, I could hopefully find the right mix between diveability and noise. This whole thing is really just an winter experiment, on my part. . (Message edited by johnboy777 on November 18, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, November 18, 2008 - 03:02 pm: |
|
I wanted a satin/brushed finish on the muffler, so I used 220P wet/dry sandpaper and then a Scotch-Brite pad. It only took about 1/2 hour, or so. Before:
After:
. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Natexlh1000
| Posted on Tuesday, November 18, 2008 - 05:45 pm: |
|
Did you fab that inlet? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, November 18, 2008 - 05:56 pm: |
|
""Did you fab that inlet?"" I spoke to the fabricator today - the elbow/bracket should get done and ship to me by mid-week next week. . |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Nyeguy
| Posted on Tuesday, November 18, 2008 - 06:06 pm: |
|
Thats gonna sound badass!! Cant wait for the sound clip!! Performance wise is should flow real well and as long as you compensate with the ECU it should put some power out! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Wheelybueller
| Posted on Wednesday, November 19, 2008 - 07:08 pm: |
|
Who is building your elbow? Would they be willing to build another? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Prowler
| Posted on Wednesday, November 19, 2008 - 07:56 pm: |
|
Yup, I'd buy an inlet elbow too, if I could find one reasonably priced. The Jardine one is pretty decent, but they won't sell exhaust system parts individually. I personally think that their mufflers are crap, but the inlet elbows look to be reasonable or even good quality. |
|