Author |
Message |
Buellbuster
| Posted on Monday, November 03, 2008 - 11:54 pm: |
|
so I just got done on the buffing wheel and I think Im pretty happy with the results...anything is better than how they started though!
|
Dtmb
| Posted on Monday, November 03, 2008 - 11:57 pm: |
|
very nice |
Ripdog28
| Posted on Tuesday, November 04, 2008 - 12:23 am: |
|
what did you use? |
Punkid8888
| Posted on Tuesday, November 04, 2008 - 07:03 am: |
|
how long did it take. That is one of my projects this winter |
Uawjesse
| Posted on Tuesday, November 04, 2008 - 07:06 am: |
|
Nice! |
Hammer71
| Posted on Tuesday, November 04, 2008 - 08:56 am: |
|
With a wheel and the right sandpaper it should take an hour or less. Looks good, did mine way back while they were still on bike and by hand.They turn a nice gold/chrome color after a heat cycle. |
Tattoo72
| Posted on Tuesday, November 04, 2008 - 09:05 am: |
|
That looks sharp. Nice work. |
Buellbuster
| Posted on Tuesday, November 04, 2008 - 09:44 am: |
|
I started with 320 grit wet (89cents), and a palm sander to knock down all the cuts and grooves from the factory, then went to a "3m finishing wheel" (6 bucks) used an air compressor and die grinder for that, then a buffing wheel and jewelers rouge(12 bucks) Didnt take more than 2 hours...3 if you count rotating the motor to pull them off, but I had the bike all torn apart anyways while I polish the frame! hope that helped! |
U4euh
| Posted on Tuesday, November 04, 2008 - 07:21 pm: |
|
I have a 9 pipe rough sanded, just waiting on the final 'polish'. Anybody interested? |
Froggy
| Posted on Tuesday, November 04, 2008 - 07:29 pm: |
|
Looks awesome, I might have to do that to my Micron |
Audioi
| Posted on Tuesday, November 04, 2008 - 10:18 pm: |
|
Looks awesome, nice job but I wonder how long before the shine is gone? I'm guessing one rainstorm..... |
Hammer71
| Posted on Tuesday, November 04, 2008 - 10:54 pm: |
|
Will last for a long while. |
Bearracing
| Posted on Tuesday, November 04, 2008 - 10:59 pm: |
|
so your saying just by sanding my stock pipes will turn them into some shiny pipes? |
Buellbuster
| Posted on Tuesday, November 04, 2008 - 11:26 pm: |
|
Audioi-its stainless steel...water isnt going to do much other than get it wet.... bear racing-not just sanding, but ya thats the idea. |
Hammer71
| Posted on Wednesday, November 05, 2008 - 08:37 am: |
|
Just sanding will get them shining like that, did mine that way but I went overboard 320 grit to 2000. Current bike had wrapped header so I'm ok untill I have to do this set. |
Cptjak
| Posted on Thursday, November 06, 2008 - 11:37 pm: |
|
sorry to say that ss is pickled and your polish job will last 3 rides and turn gold again looks nice now though |
Rpm4x4
| Posted on Friday, November 07, 2008 - 12:06 am: |
|
That looks fantastic. I had never thought of that. I want to do that. |
Punkid8888
| Posted on Friday, November 07, 2008 - 07:09 am: |
|
yes it will turn gold, but it will still by a nice polished finish. I know of some other guys on here that have done it and when the pipes turn gold again they look even Better. some one had a nice stock, polished, then after some mileage comparisons pics, maybe they will chime in |
Gentleman_jon
| Posted on Friday, November 07, 2008 - 08:50 am: |
|
Here are my pipes, first shot is after polishing , second shot forty days later.
I polished them on the bike. I used a 3M finishing wheel, a little drum sander with alternating layers of sandpaper and Scotchbrite pads. Fine grade. This got out the tool marks. Then worked my way up with wet and dry sandpaper to 1500. Finished with Luster Lace, a polish embedded nylon ribbon that wraps around the pipe when polishing. Eagle Mag One is good too for periodic clean ups. These are the 2004 pipes. |
Spacecapsule1
| Posted on Friday, November 07, 2008 - 09:47 am: |
|
"Audioi-its stainless steel...water isnt going to do much other than get it wet.... " ....and make it rust. like mine are after only 7 months.... |
Buellbuster
| Posted on Friday, November 07, 2008 - 09:59 am: |
|
no rust on mine....going on 5 years now....maybe the newer years use inferior materials? |
Buellinachinashop
| Posted on Friday, November 07, 2008 - 10:10 am: |
|
I used 80 grit, got nice n shiney, but as the pics from Jon show, they turn back to bronze quickly. |
Punkid8888
| Posted on Friday, November 07, 2008 - 12:13 pm: |
|
80 Grit?? Thats it? I think 80 grit would leave some serious groves I plan on starting with maybe 300 then working my way up till about 1500 or until my arms fall off. I will post some pics when the snow falls and I have some free time to do it. |
Spike
| Posted on Friday, November 07, 2008 - 01:14 pm: |
|
Here are two pictures of my Ulysses header after some light polishing. I didn't take them to a mirror shine, this was done just with S100 polishing soap. The 1st picture is immediately after polishing, the 2nd picture is ~80 miles later: The color will turn gold over time, but the shine will stay. Eventually they'll get dirty and dull looking from riding in the rain, but the shine comes back with a quick application of the polishing soap. |
Whitetrashxb
| Posted on Friday, November 07, 2008 - 01:46 pm: |
|
got tired of re-polishing so here they are now http://www.myinsidepass.com/p/5_tx_lifestyle/insid epass_eaglescanyon_09-23-08_sm_gm5v856159
|
Nillaice
| Posted on Friday, November 07, 2008 - 01:51 pm: |
|
that's purdee! i'll be painting mine this winter. polishing is just not worth it IMO |
Whitetrashxb
| Posted on Wednesday, November 12, 2008 - 11:56 am: |
|
Nillaice- why not ceramic coat it instead of paint? |
Buellinachinashop
| Posted on Wednesday, November 12, 2008 - 04:36 pm: |
|
Looks like Spike likes riding through Baby Poop Factories. |