G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » XBoard » Buell XBoard Archives » Archive through November 09, 2008 » Lights went out... « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbniner
Posted on Saturday, November 01, 2008 - 05:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I haven't been able to ride much cause of schedule and weather, but last week my lo beam headlight went out on a short ride.

I checked the bulb and the fuse and both looked ok, so I've been using the high beam since then. I've gone maybe 40-60 miles that way and last night on the way home my high beam went out. (no fun at night)

Haven't had a chance to check it out yet, but this is the only problem I've had with the bike. Did the high beam go out cause I used it exclusively for a couple days? I just have the stock lights on it, haven't even done the recall yet. It took my dealer a month to get the parts and I haven't had time to go in yet.

Any suggestions about what to check or has anybody had a similar experience?

Thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Froggy
Posted on Saturday, November 01, 2008 - 06:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)


quote:

Did the high beam go out cause I used it exclusively for a couple days?




No, I lost my low beam down at Buelltoberfest, rode around for the better part of a month, 3k miles on just the highbeam, occasionally with my PIAA's too.
Top of pagePrevious messageNext messageBottom of page Link to this message

Iamarchangel
Posted on Saturday, November 01, 2008 - 06:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

I had my 9R's lights go out because of rotten wires. Check the sub harness that goes to the lights. It should be tucked up between the headlight housing. It's fixed there by a plastic tree.

The black wire is the ground. At the harness it is common to both and some inches back it is split to each of them.

The previous owner had done some work and never put it back. The wire had been exposed to moisture and had turned green and rotten.

Because of the sequence of your lights out, I would first look at the actual 4 wire connector and makes sure those wires are good. After that, I would follow the black wire to where it divides to the two grounds.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbniner
Posted on Saturday, November 01, 2008 - 07:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks, just tore it apart and the High beam is fried, so I'd say they are not related. Not directly anyway. Do i have to go to harley to replace the bulbs or can I go anywhere?
Top of pagePrevious messageNext messageBottom of page Link to this message

Nillaice
Posted on Saturday, November 01, 2008 - 07:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

NE where. got mine at cycle gear. 16 or so each. make sure you get the 3 prong h7 or 3 or whatever it is
Top of pagePrevious messageNext messageBottom of page Link to this message

Mrd
Posted on Saturday, November 01, 2008 - 07:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Advance auto parts. $5 dollars.
Top of pagePrevious messageNext messageBottom of page Link to this message

Xbniner
Posted on Saturday, November 01, 2008 - 08:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

Thanks just got two at Advance, just to check if it was the bulb on the low beam. It's not, but that fixed the high beam. Thanks guys!
Top of pagePrevious messageNext messageBottom of page Link to this message

Bobup
Posted on Thursday, November 06, 2008 - 07:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only)

when that happened on my '05 XB9SX, it turned out to be a bad stator....

hope its not that, but it might be
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration