Author |
Message |
Blackm2
| Posted on Tuesday, October 28, 2008 - 02:18 pm: |
|
Is the rear sprocket the same as one you would find on the Sportsters of the same year? I have an '01 Cyclone, would the sprocket from an '01 Sportster work? Thanks |
Brinnutz
| Posted on Tuesday, October 28, 2008 - 02:29 pm: |
|
If you need another one. I have a stock Buell one lying around. (Message edited by brinnutz on October 28, 2008) |
Firemanjim
| Posted on Tuesday, October 28, 2008 - 03:23 pm: |
|
IIRC the Buell sprocket has a bigger center hole. |
Spiderman
| Posted on Tuesday, October 28, 2008 - 03:33 pm: |
|
What the FMJ said. It is the same except the center hole's inner diameter is larger... |
Buellistic
| Posted on Tuesday, October 28, 2008 - 10:03 pm: |
|
Rear sprocket PN 34929-94Y(61 Belt Teeth) ... |
Buellboiler
| Posted on Thursday, October 30, 2008 - 11:55 am: |
|
You will also want to check the thickness of the pulley where it mounts to the wheel to verify that they are the same. I switched to an aftermarket rear pulley; both the inner diameter (needed to be increased to mate to the PM wheel) and the thickness needed to be changed (decreased to keep the centerline of the pulley the same as the stock pulley). Measure before you buy. |
|