| Author | Message | ||
     Duggram |
Can anyone suggest clipons for the 1125? I low-sided last weekend and bent mine. All the experienced guys at the track said get clipons cause they're easier ($10) to replace when bent, which could be often cause I'm just a newbie on the track. | ||
| Xl1200r |
What bent? The bar or the top triple tree? If it's just the bar, there should be a allen screw on the inside of the triple tree that holds the bar on, and I think you can get new bars for about $10 from Buell as well. | ||
| Duggram |
It was the bar. Thanks for the tip. I've been working 12's since last weekend and haven't had a chance to take it apart. The advice was coming from non-Buell riders that have never seen a 1125R. | ||
| Zac4mac |
Doug - handlebar, clip-on, 7/8 inch (2) ('08 1125R parts book) N0002.02A8 About 22 bucks, MSRP. Z | ||
| Duggram |
Z, thanks. I just got back from ordering at the dealer. Also needed a left peg @ $36!!!. |
