| Author | Message | ||
     Silas_clone |
Could anyone recommend a breather set-up for an M2? I have a setup now with the rear bolt exiting straight out from the rear jug and the front has a 90 degree elbow. I have a CF air cleaner. Also, I saw a kit that runs over the top of the rocker boxes and claims that this limits the amount of oil lost. I thought that this probably would not work this way since it is mostly oil mist, but would it negatively effect breathing? | ||
| Natexlh1000 |
It's a common misconception that if the lines ar run up and over, that the oil will get back into the engine. There are one-way umbrella valves in the rockers that would prevent that. I screwed around with different things before just running them together to a hose leading down to the ground. Personally, I find that most of the crap that escapes my engine is watery babysnot that you wouldn't want returned to your engine anyways. I am currently running clear neoprene tubing from home depot and I can watch it gradually cool down and condense like I'm running a very noisy still!  | ||
| Brinnutz |
What size bolt would I need for the 90 degree angled one? I want to replace mine. | ||
| Rich |
I put xb rocker boxes on mine(the top piece anyway} with pcv valves. The ran hoses over to my catch can. No more mess. I had to use automotive pcvs, as my RS doesn't have much clearance under the tank. | ||
| Mikeyp |
I second Rich's post. I did the same thing a few years ago, and it's working out just peachy. Isnt there a parts list kicking around in the KV? | ||
| Silas_clone |
I think I'll try something like this http://store02.prostores.com/servlet/bikerhaven/De tail?no=215 or this http://www.chromebrothers.com/index.cfm?fuseaction=catalog.prodInfo&productID=1664&categoryID=413 (Message edited by Silas_clone on October 04, 2008) | ||
| Skntpig |
If you are looking for 2 of the 90 deg breather bolts you can get them from the buell/harley dealer. My stock 97 s1 had one straight and one 90 deg. Just order 2 of the 90s | ||
| Silas_clone |
Skntpig, that's exactly what I want! I was looking at a photo of a flathead on Craig'slist and told the owner he was running VL top's but EVO engines? I know nearly nothing. I ain't going back tho' | ||
| Bad_karma |
John Forcewinder offers a different setup. Also check out J&P then have some options that I have used. I'm sure that there are a few more in my favorites that I have forgotten. Joe | ||
| Dirt |
The part number for the 90 degree breather bolts that came with my Race Air Cleaner kit is 29390-96Y. Cost is $13.45 each, before any discount. | ||
| Pkforbes87 |
$50 Kuryakyn - http://www.denniskirk.com/jsp/product_catalog/Prod uct.jsp?skuId=182805&store=Main&catId=&productId=p 182805&leafCatId=&mmyId= $30 Drag Specialties - http://www.denniskirk.com/jsp/product_catalog/Prod uct.jsp?skuId=&store=Main&catId=&productId=pH30016 &leafCatId=&mmyId= | ||
| Silas_clone |
I contacted two dealerships and googled the part number to find Biker Bob's in Michigan, as a possible source. The PN 29390-96Y is obsolete, superceded by PN P0235.9A That doesn't look promising either. I will go custom if I can't get one. Thanks | ||
| Tripp |
i have one in stock, badweb price $18.90 available at: parts@precisionhd.com precision is proud to be a badweb sponsor | ||
| Jayvee |
The Custom Chrome banjo bolt breathers are like about $22 a pair, plus some rubber hose and you're good... These can be ordered from any dealer, or online. | ||
| Silas_clone |
Tripp, I'd like to get that part. | ||
| Tripp |
i can get that out today, i only have the one however, do you need two? | ||
| Tripp |
duh, i just read your original post, so it looks like you only need one. i'll call you. |
