Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Toona
| Posted on Saturday, April 15, 2006 - 12:01 am: |
|
I've not seen this anywhere on the BWB or in the service manual, so here's a little tip we figured out when changing the plugs after a cold start rev up plug fouling; After pulling the upper/lower airbox cover (per manual) to get to the rear spark plug, the front plug is still unaccessable from the topside. I pulled the 3 torx screws that hold the left side air scoop on and just used a 5/8" wrench to loosen the spark plug. Simple as pie, completed the plug change under 10 minutes. The rear spark plug is easily accessed with a simple wobble extension and a 5/8" peanut plug socket. Hope this helps, Dan |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Snowhownd
| Posted on Wednesday, May 31, 2006 - 09:50 pm: |
|
Thanks for your time posting this tip - am going to give this a try |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Rahbert
| Posted on Thursday, September 18, 2008 - 03:01 pm: |
|
What is a peanut socket?? |
|