Author |
Message |
Badlionsfan
| Posted on Wednesday, September 17, 2008 - 12:47 pm: |
|
Woot-woot, Teach at Western Reserve has hooked me up! Thanks Jim! I will have some results and MPG updates later this afternoon. gonna have about 45-50 miles of highway to compare the mileage. |
Thurstonbuell
| Posted on Wednesday, September 17, 2008 - 12:57 pm: |
|
Ben, Now I PM'd you , Ken. |
Bueller_bjorn
| Posted on Wednesday, September 17, 2008 - 01:01 pm: |
|
damn i wish liberty was my dealer, i guess it could be if i want to take a 2 hour ride. damn my dealer and there crappy information. i don;t want to go there unless i know they can do it, its an hour 20 ride both ways. |
Teach
| Posted on Wednesday, September 17, 2008 - 01:16 pm: |
|
Our tech did the new flash on our demo bike and he reports that it runs "a lot smoother at the low rpm's". Great news, but of course we need more feedback from owners that have the new reflash. But it looks promising so far... |
Odinbueller
| Posted on Wednesday, September 17, 2008 - 01:18 pm: |
|
Bjorn, If you give us a heads up on when you'd be arriving, we'd be happy to do the update for ya. Give Tim or Vinny a call at the service desk, 732-381-2400, option 3, and let them know your situation. I'm sure they can work with you. Chris |
Teach
| Posted on Wednesday, September 17, 2008 - 01:21 pm: |
|
I have made arrangements to have an 1125R dyno'd before and after the new flash. It could happen as early as this afternoon or tomorrow a.m. I will post the results.... |
Odinbueller
| Posted on Wednesday, September 17, 2008 - 01:24 pm: |
|
Also, I can let Jeff @ Danbury know how to get the latest update if they need assistance on that end. Either way, let me know and I'll help as best I can. Chris |
Xb9
| Posted on Wednesday, September 17, 2008 - 01:45 pm: |
|
Ben, got your VM, but looks like Teach is getting you in over at WRHD. Teach, you have mail. |
Court
| Posted on Wednesday, September 17, 2008 - 01:47 pm: |
|
Bueller_bjorn: I'd suggest you call Jeff at Danbury. They have an awfully good reputation and, just like I said yesterday, you guys here (as a result of a couple folks writing and asking me) literally got the word minutes after a dealer would have had access to the update. The update was in the system and went live yesterday. It would not be the least bit unusual for it to take some time for proper notifications to be disseminated. Be cool and let's not give any one or the folks at Buell reason to make sure that ALL DEALERS are contacted before sharing info with us next time. Be patient. Call. Refer your dealer to this thread if you need. It's all good. Court |
Teach
| Posted on Wednesday, September 17, 2008 - 01:52 pm: |
|
Just a heads up, the flash didn't show up on H-Dnet, but did show up on Digtech. (At our dealership) |
Badlionsfan
| Posted on Wednesday, September 17, 2008 - 02:20 pm: |
|
Well she's Gettin her brain reprogramed as I type this. I'll start a thread on my experinces when I get home. |
Dartanjang
| Posted on Wednesday, September 17, 2008 - 02:45 pm: |
|
Yes, yes, all mighty BMC yes. I have been holding my breath for this one a really long time. I'll be pounding on the dealer's door first thing tomorrow morning. Did I mention that I have really high expectations on this one?... |
Chevycummins
| Posted on Wednesday, September 17, 2008 - 02:55 pm: |
|
Got the program done and can ride in 6th gear at 50mph no problem. Runs perfect at speed now, much better at lower speed in city driving. All I can say is thanks and keep up the good work Buell! |
Thurstonbuell
| Posted on Wednesday, September 17, 2008 - 03:06 pm: |
|
Teach , You know I'll be calling , plus I'm waiting on my Buell emblem for my new clutch hub , Ken. |
Two_buells
| Posted on Wednesday, September 17, 2008 - 04:38 pm: |
|
getting my ECM done on Thursday, Can't wait! |
Eaton_corners
| Posted on Wednesday, September 17, 2008 - 05:23 pm: |
|
+1 on Chevycummins post. Too early yet to tell about MPG. |
Badlionsfan
| Posted on Wednesday, September 17, 2008 - 05:28 pm: |
|
Ben, got your VM, but looks like Teach is getting you in over at WRHD. Teach, you have mail. Yup he hooked me up! Side note, are you available saturday afternoon or so to help me out with that noid plug thing? |
Bigdog_tim
| Posted on Wednesday, September 17, 2008 - 05:35 pm: |
|
HEADS UP! I just learned that when Buell releases something to DT, it goes through SPX (or maybe SBX?). In any event, SPX provisions the update in batches. I don't know if they do it geographically, by dealer number, or what the measurement is. In any event, not all dealers have the update via DT yet. In particular, the three dealers in the Seattle area do not have it (and all three are "always online"). So - for some of us, it may be a few more days (or however long to process all the batches to get the updates out). Of course, as always, YMMV. |
Luisemilio25r
| Posted on Wednesday, September 17, 2008 - 05:41 pm: |
|
Called my dealer today and scheduled an appointment for friday for the flash and the rear turn signals (both ) plus a cracking sound in the front end when compressing the suspension |
Xb9
| Posted on Wednesday, September 17, 2008 - 05:55 pm: |
|
Ben, give me a call Saturday Morning - Saturday should be good. |
Badlionsfan
| Posted on Wednesday, September 17, 2008 - 05:59 pm: |
|
cool. I work til 5 am Saturday morning, I'll try to be up by 10 or so and give you a shout. Thanks! |
Stewadi
| Posted on Wednesday, September 17, 2008 - 06:09 pm: |
|
Tim, I got the same answer that u got at Downtown. Kevin will hook us up when it's available. |
Donutclub
| Posted on Wednesday, September 17, 2008 - 06:22 pm: |
|
Is there a number associated with the ECM relfash? My Dealer wasn't aware of the reflash and he was asking for a HD Net number?? |
Black9
| Posted on Wednesday, September 17, 2008 - 06:32 pm: |
|
I got the reflash done this afternoon at Dillon bros. HD,GREAT dealer BTW, bike runs great down low, jury out on mpg but, who cares after the driveability improvement!! Thanks, Buell. |
Odinbueller
| Posted on Wednesday, September 17, 2008 - 06:34 pm: |
|
This re-flash is not (so far) associated with a product program that can be referenced on h-dnet.com. Here's what the servicing dealer needs to do... Update Digital Technician II to version 2.002. From the first DTII screen, click on "What's New". Scroll down to the "Re-flash" section, and it will show all the updated 1125 calibrations. PM or call me if anyone has any questions. Chris |
Froggy
| Posted on Wednesday, September 17, 2008 - 08:29 pm: |
|
Bueller_bjorn I am down the road from you, i am more than willing to ride it there for you! |
Cobradave93
| Posted on Wednesday, September 17, 2008 - 08:41 pm: |
|
Just got mine flashed today and it is smoother down low. I also filled the tank and checked mileage with calculator, not the dash readout average. Half the tank with old settings and half on the new flash on the way home, I averaged 37.5 mpg. I barely got 31-32 mpg before this. Looks like 40 mpg should be reasonable. We will just have to wait and see if it helps the fuel boiling problem. |
Two_buells
| Posted on Wednesday, September 17, 2008 - 08:51 pm: |
|
Dave, you SUCK! I called the dealer after you did and they didn't have and more free time to do my flash. I'm going the Lancaster on Thursday. Glad you got yours worked out. Did you get turn signals? |
Cobradave93
| Posted on Wednesday, September 17, 2008 - 09:00 pm: |
|
Yes, I got the turn signal off a demo bike because they didn't order me one last week and I got lucky with getting it all done tonight because they didn't know when they could do it any other time soon. Good luck with yours tomorrow. |
Roc
| Posted on Wednesday, September 17, 2008 - 09:08 pm: |
|
UPDATE DEPLOYED TO DT2 BY TIME ZONE, WESTERN TIME ZONE DOES NOT HAVE IT YET. |
|