Author |
Message |
Mikef5000
| Posted on Wednesday, September 17, 2008 - 11:12 am: |
|
Are all XB passenger pegs and brackets/supports/hangers the same? You know what I'm trying to say. (Message edited by Mikef5000 on September 17, 2008) |
No_rice
| Posted on Wednesday, September 17, 2008 - 11:27 am: |
|
basically. the 03's were a little shorter, as in the feet had to be up a bit higher on the 03's than on the rest of the xb's but that was just the length of the mount. otherwise they all bolt on the same and should be interchangable |
Badlionsfan
| Posted on Wednesday, September 17, 2008 - 11:46 am: |
|
so firebolt is same as lightning? As Johnny Carson would say, "I did not know that." |
No_rice
| Posted on Wednesday, September 17, 2008 - 12:19 pm: |
|
also same as the 1125 |
Badlionsfan
| Posted on Wednesday, September 17, 2008 - 05:18 pm: |
|
I figured the 1125r and firebolt had the same ones since the tail is the same. didn't know that they were the same across the board. Good info, thanks. |
Nillaice
| Posted on Wednesday, September 17, 2008 - 05:26 pm: |
|
so the 03's are shorter then others... really?! so i could get some newer brackets and XBS rider pegs to increase passenger comfort... NAAAA! I'd have more fun without her telling me to slow down, and all that stuff |
Andymnelson
| Posted on Wednesday, September 17, 2008 - 05:31 pm: |
|
The 1125r has different heel guards. Not sure if the guards can be swapped. Anyone?
|
No_rice
| Posted on Wednesday, September 17, 2008 - 05:34 pm: |
|
yes the heel guards will interchange. |
|