G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Midknyte Posted on Wednesday, September 10, 2008 - 12:14 pm:        So, mine's broke. And I have a new one. And I'm looking at the service manual. And it looks like I'm going to have to drain my brake fluid in order to replace it. Can't just take the old one off and screw the new one in w/o making a mess... Am I correct? Thanks.   Scrapin Posted on Wednesday, September 10, 2008 - 12:27 pm:        You'll have to bleed the brakes anyways because it's going to let air into the system...so draining should not be an issue.   Retrittion Posted on Thursday, September 11, 2008 - 02:38 am:        At least bleeding the brakes isn't to rough a job -- just take your time. I do wish Buell of someone would make a quick disconnect for our brakes though, but oh well. On the up side it means your gonna get new fluid, always a good thing for the breaking and stopping and the not crashing! LOL, take pics of the operation and share 'em! Ride safe   Point_doc Posted on Thursday, September 11, 2008 - 06:14 pm:        LSL has speed bleeders, I have replaced all of mine with these.   Glitch Posted on Thursday, September 11, 2008 - 06:28 pm:        It's such a small system to bleed, it won't be a bother.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: