Author |
Message |
Duggram
| Posted on Tuesday, September 09, 2008 - 10:21 am: |
|
I asked this on the 1125 list with no responses there. Where can I see a list of Buell 1125 race parts? Next month I'm getting my SMRI racing license (Sandia Motocycle Racing, Inc). Will this be license enough to get the parts? I got my 1125 specifically for racing/track days. I don't plan on winning a lot of races but I do plan on having a lot of fun. There's no reason for me to have the most tricked out bike, but would like to get a belly pan, exhaust, better brakes (?), etc. Any help appreciated, Doug |
Slaughter
| Posted on Tuesday, September 09, 2008 - 11:27 am: |
|
I don't think there's a published list of parts (yet) The swingarm/chain/sprocket and axle system IS being run on a few bikes (I've seen it on Higbee's out here) - but I'd call Henry directly to see which parts are available, get that info to your dealer and then have your dealer order the parts for you. If your dealer is responsive (there are one or two good ones) - you can have them make the call. I've found it easier to get the part numbers/descriptions myself and then get that info to the dealer so the stuff can be ordered. There are TONS more "race only" things than those that are going to be listed in any catalog. The supply varies. There are many "race only" pieces that come off of test mules that are rebuildable - stock forks, wheels, engines. (at least on the XB series) Because the 1125R is so new, there may not be the large supply of "stuff" as there is for the XB. |
Odinbueller
| Posted on Tuesday, September 09, 2008 - 08:47 pm: |
|
There are a few race parts out there for the 1125R. You need to hook up with a dealer in your area so that you can order these parts from Henry Duga. You can get the application from the Buell website. If you don't mind paying shipping, we can help you out as well. There is an 1125R chain drive conversion kit available, retails for about $1650.00. Steering stabilizer retails for about $415.00. Catalyst Racing Composites offers a fully faired race body for the 1125R. We needed to modify it a bit, but the quality of the kit is really top shelf. You can get in touch with them here; http://www.catalystracingcomposites.com/ K&N air filter part number 33-2207 will work with some simple modifications, check the thread out here: http://www.badweatherbikers.com/buell/messages/290 431/389633.html?1219945160 Techno Research has the software in place to tune DDFI III ECMs now, but you need a shop with a dyno & is familiar with the program. Hope this helps, Chris |
Xbcrazy
| Posted on Tuesday, September 09, 2008 - 11:40 pm: |
|
Hey Douggram, If you are interested in bodywork for the 1125R, I just received my first couple of sets from Flexi-Glass. I don't even have the new 1125R product up on my website yet. You can take a look at the stuff on Flexi-Glass' site. www.flexi-glass.com. Prices are listed and I do offer BadWeb discounts. Pete GrandStand Designs |
Bearracing
| Posted on Wednesday, September 10, 2008 - 01:21 am: |
|
Got anything for the Firebolt XB12R? |
Sheepaholic
| Posted on Wednesday, September 10, 2008 - 03:33 am: |
|
Chain drive swing arm kit G0625.08AZ Available late 2008 Steering damper kit(Ohlins) J1402.08AZ Available now GP shifter kit(4 different kits available) (Belt or chain drive)Optional “E” shift sensor capable Various Available now 17” x 3.5” Magnesium front wheel(2.5 lbs lighter than stock) G0110.04AH Available now 17” x 5.75” Magnesium rear wheel(3.5 lbs lighter than stock)G0309.05AH Available now Programmable ECM kit(1125R DDFI 3)(Requires proof of racing licence for purchase) Y0052.08AZ Available now Number plate eliminator(Replaces number plate/indicators) L0040.08AZ Available now Fibreglass belly pan(Stock muffler)L0500.08AZ Available now Headlight filler panels(Fibreglass black gel-coat) TDA Available now Race body-work kit(Primed fibreglass front fairing, lowers and belly pan)TBA Available late 2008 Race body-work kit(Carbon-fibre weave front fairing, lowers and belly pan)TBA Available late 2008 Tail-section cover(Fibreglass or carbon-fibre weave) TBA Available late 2008 Air-box cover(Fibreglass or carbon-fibre weave) TBA Available late 2008, early 2009 Race compound front brake pads H0300.06AH Available now Radial front brake master-cylinder(Billet Nissan) H0046.08AZ Available now Lightweight battery(over 8lbs lighter than stock) Y0100.08AZ Available late 2008, early 2009 Showa 25mm front fork cartridge kit(Lightweight, low friction coating, fully adjustable, optional springs) J0165B.08AZ Available late 2008, early 2009 Showa racing rear shock-absorber(Kashima coated body, fully adjustable, optional springs)K0410D.08AZ Available late 2008, early 2009 Front brake line(Extended length Goodridge) H1531A.08AZ Available late 2008 Quick disconnect brake line(Dry break, quick disconnect for endurance racing) H1531.08AZ Available late 2008 |
Duggram
| Posted on Wednesday, September 10, 2008 - 06:22 am: |
|
Sheep, your post needs to be a "sticky" but I don't think this forum supports that feature. Thank you a lot. |
Eboos
| Posted on Saturday, September 13, 2008 - 08:20 am: |
|
I just popped a little wood reading that list of parts. |
Snacktimekc
| Posted on Wednesday, February 04, 2009 - 03:56 pm: |
|
Chain drive swing arm kit G0625.08AZ Available late 2008 Steering damper kit(Ohlins) J1402.08AZ Available now GP shifter kit(4 different kits available) (Belt or chain drive)Optional “E” shift sensor capable Various Available now 17” x 3.5” Magnesium front wheel(2.5 lbs lighter than stock) G0110.04AH Available now 17” x 5.75” Magnesium rear wheel(3.5 lbs lighter than stock)G0309.05AH Available now Programmable ECM kit(1125R DDFI 3)(Requires proof of racing licence for purchase) Y0052.08AZ Available now Number plate eliminator(Replaces number plate/indicators) L0040.08AZ Available now Fibreglass belly pan(Stock muffler)L0500.08AZ Available now Headlight filler panels(Fibreglass black gel-coat) TDA Available now Race body-work kit(Primed fibreglass front fairing, lowers and belly pan)TBA Available late 2008 Race body-work kit(Carbon-fibre weave front fairing, lowers and belly pan)TBA Available late 2008 Tail-section cover(Fibreglass or carbon-fibre weave) TBA Available late 2008 Air-box cover(Fibreglass or carbon-fibre weave) TBA Available late 2008, early 2009 Race compound front brake pads H0300.06AH Available now Radial front brake master-cylinder(Billet Nissan) H0046.08AZ Available now Lightweight battery(over 8lbs lighter than stock) Y0100.08AZ Available late 2008, early 2009 Showa 25mm front fork cartridge kit(Lightweight, low friction coating, fully adjustable, optional springs) J0165B.08AZ Available late 2008, early 2009 Showa racing rear shock-absorber(Kashima coated body, fully adjustable, optional springs)K0410D.08AZ Available late 2008, early 2009 Front brake line(Extended length Goodridge) H1531A.08AZ Available late 2008 Quick disconnect brake line(Dry break, quick disconnect for endurance racing) H1531.08AZ Available late 2008 Anyone have quick access to the retail prices for the above? |
Sd26
| Posted on Wednesday, February 04, 2009 - 06:06 pm: |
|
Snack, you gonna trade some PBR for an 1125 now? Super Dave |
Snacktimekc
| Posted on Wednesday, February 04, 2009 - 07:54 pm: |
|
ya never know... |
Sd26
| Posted on Wednesday, February 04, 2009 - 07:58 pm: |
|
Dude, you are so wanting one...LOL! If you don't have one already. |
|