G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Grianp Posted on Tuesday, September 02, 2008 - 06:38 am:        I am looking to purchase a new Front Brake Rotor Kit but I am locating two different numbers in my search. Are they both identical or Should I get one over the other? Both are priced identical. Sorry if this is a silly question. H1201.02A8 & H1201.02A8A Thanks!   Jlnance Posted on Tuesday, September 02, 2008 - 07:36 am:        Before you buy a new rotor, search this site for threads on brake pulsing. Assuming you are replacing it because it pulses, it likely isn't the rotor.   Grianp Posted on Tuesday, September 02, 2008 - 08:10 am:        I have done a search and upgraded my pads to the Lyndall Golds, but still have pulsing. Maybe I am missing something or havent tried everything. Any ideas? I was hoping this would be a solve all issues fix.   Jlnance Posted on Tuesday, September 02, 2008 - 08:27 am:        Clean your rotor with brillow pads or very fine sand paper. Also, the Lyndals are not an instant fix. You have to wear away the deposits on the rotor. You may end up having to replace the rotor, but it's worth seeing if you can clean them up first.   Jlnance Posted on Tuesday, September 02, 2008 - 08:40 am:        Take a look at this thread: http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=142838&post=1243222#POST1243222

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: