| Author | Message | ||
     Thejuicer |
What are the diffrences in the two? size? mounting...my x1 exhaust is trashed and i have a line on a nice exhaust from a s1...thanks in advance guys. | ||
| Guell |
depends on the s1 exhaust- 96-98 normal s1's had 2" pipes, and your x1 had a 2.5 A 98 s1w had the 2.5. It will run over your frame not under it like your x1 pipe and that puts the pipe closer to your leg. | ||
| Thejuicer |
Thanks for the info...think im gunna pass on it then, sounds like they were quite diffrent...probobly mount a little diffrent too. | ||
| Phelan |
They mount the same, but the tubing on the '99-later frames ran higher up than the '9X-'98 frames. The later exhaust will fit under the frame rail on the earlier bike, but I don't the earlier exhaust will fit running over the later frames. | ||
| Firebolt020283 |
I got a question simular to this as I have a 2000 m2 which has the 2.5 headers but My dad has a force pipe from a 96 s1 that he said he would give me if it will fit my bike. So my question is would it fit? | ||
| Guell |
Phelan, you got it backwards man, the later will not run under the frame rail unless it has been seriously massaged. The earlier will run over the 99+ frame rail | ||
| Phelan |
OIC...My bad. | ||
| Guell |
No problem man, i would like to see if i could mount a newer 99+ header on my 97, i would have more options for a muffler. |
