Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Rasmonis
| Posted on Thursday, August 14, 2008 - 06:26 pm: |
|
Bike would backfire and only run fair for about 15 miles. Checked the timing (was retarded) and set it according to EcmSpy instructions. Tried various maps, datalogging, and the idle would drop 2-3k every 10 seconds or so. 3.8-5k it ran rich. Tried two ECMs with the same results. Now, I can only get bike to idle with TPS @ 7%, and runs crappy (rich) from 4-5k rpm. So I checked the timing again, and now the injectors only kick on when the line is to the left of the inspection port. I can't get it into a position where I can adjust the cam sensor. What gives? |
|