Author |
Message |
Natexlh1000
| Posted on Thursday, July 31, 2008 - 08:32 am: |
|
I have had a clunk every time I applied the front brake for a bit more than a year now. I first had the steering head bearings replaced. They were shot and it improved the handling of the bike. BUT The brake still clunked. I couldn't find anything loose in the front of the bike so I resigned myself to ride a clunking bike for a year. Well yesterday, in the sun, I saw just a hint of blue paint on the D-shaped thing on top of the front isolator. Sure enough, the D shaped thing had rotated so that the flat spot wasn't pointing to the front and the lack of clearance was allowing the engine to thunk against the frame in deceleration! Fixed it in 10 minutes!! I don't know if I put it in wrong or if it vibrated around by itself. |
Bad_karma
| Posted on Friday, August 01, 2008 - 12:40 am: |
|
Excellent! Joe |
Oldog
| Posted on Friday, August 01, 2008 - 08:18 am: |
|
Hey Nate! I have to change the front iso this weekend did you say that the "err good ones" say "barry" on top? what condition is yours in ? naustin is selling his S3 because he cant keep them look for his post less than 1 K miles failure and busted head bolt too. |
Natexlh1000
| Posted on Friday, August 01, 2008 - 11:13 am: |
|
Yeah the good ones say "barry" on them from barry controls. It should be cast in tiny letters in the rubber. |
Buellfighter
| Posted on Friday, August 01, 2008 - 11:35 am: |
|
Had the same thing happen to me Natex, it drove me crazy til I noticed. |
Natexlh1000
| Posted on Friday, August 01, 2008 - 11:36 am: |
|
Now my X1 is more smooth on the highway than my new ULY. Not as quiet though |
Eshardball
| Posted on Sunday, August 03, 2008 - 09:49 am: |
|
Where do you find the isolators that say "barry"? I just repalced mine and posted a new thread about the urethane replacment. I put the 16207-79B in because it was readily available but I would swap it for the piece of mind that a better part brings |
|