| Author |
Message |
    
Jerseyguy
| | Posted on Thursday, July 24, 2008 - 12:44 pm: | 
|
I like it too, but there is a coolant reservoir also behind the right scoop. We'd have to find a place for that somewhere else. |
Blake
| | Posted on Thursday, July 24, 2008 - 01:23 pm: |
|
|
Blazin_buell
| | Posted on Thursday, July 24, 2008 - 05:38 pm: |
|
Thanks Blake, you must have been reading my mind. I was wondering what it would look like without the mirrors......mo better. |
Crowley
| | Posted on Thursday, July 24, 2008 - 05:50 pm: |
|
They look much better with a bar end mirror |
Stealthfighter
| | Posted on Thursday, July 24, 2008 - 06:28 pm: |
|
the mirrors are the smallest problem of the 1125CR... |
Ridenusa4l
| | Posted on Friday, July 25, 2008 - 02:39 am: |
|
Crowley what kind of bar end mirrors do you have? i was thinking about doing the same thing and did you get the dark horse mirror block off plates????
Thanx, Jake |
Stealthfighter
| | Posted on Friday, July 25, 2008 - 07:08 am: |
|
take Rizoma:
or
best quality. billet alloy... |
Crowley
| | Posted on Friday, July 25, 2008 - 07:38 am: |
|
Apart from the Rizoma lens, the mount is home made. I used a Rawlbolt up the bars. Very secure.
I've put flush mounted LED indicators where the mirror used to bolt on.
When I get the bike back from the shop with a fixed clutch (it's been there 2 weeks already) I'll take some photos for you. |
Ridenusa4l
| | Posted on Friday, July 25, 2008 - 02:56 pm: |
|
Thanx alot...also how do the mirrors perform at speed,vibrate alot?, any worry of them flying off or anything?... |
Ridenusa4l
| | Posted on Friday, July 25, 2008 - 02:57 pm: |
|
also do you have 2 mirrors or just 1??.. |
Crowley
| | Posted on Friday, July 25, 2008 - 06:28 pm: |
|
I use one properly engineered mirror so it won't fly off. Hardly any vibes but then my bike has always been pretty smooth.
 |
Ridenusa4l
| | Posted on Saturday, July 26, 2008 - 01:41 am: |
|
where'd you get those led's at?..
btw very sweet set up.. |
Thespive
| | Posted on Saturday, July 26, 2008 - 02:27 am: |
|
I'll be curious if the CR offers any increased wind protection over the XBS, and if it retains any of the "Quiet Zone" of the faired 1125R.
--Sean |
Crowley
| | Posted on Saturday, July 26, 2008 - 04:40 am: |
|
Ridenusa,
Ilive in the UK, most aftermarket places stock stuff like that. If you can't source any, give me a shout. |
Slinger
| | Posted on Saturday, July 26, 2008 - 08:13 am: |
|
Are you kidding me? I think I just puked in my mouth! |
Ridenusa4l
| | Posted on Saturday, July 26, 2008 - 03:18 pm: |
|
Crowley i've been lookin and have found some mirror block off signals but none for the 1125...will any other bikes(signal kits) work, what kind of signals did you get and who are they made by...thanx.. |
Badlionsfan
| | Posted on Saturday, July 26, 2008 - 03:33 pm: |
|
I'll be curious if the CR offers any increased wind protection over the XBS, and if it retains any of the "Quiet Zone" of the faired 1125R.
--Sean
Can't see how it'd be much better than a XbS. |
