| Author |
Message |
    
Ejoyal
| | Posted on Saturday, May 17, 2008 - 02:10 pm: | 
|
I got a great answer for my Buell last time so I figured id try this. I have a 2007 Road king with issues. It only has 2600 miles on it but it wont stay running. It will fire up then die two seconds later. It does it every time. The fuel pump is working. It was dumped so I was curious if it has a tip over valve that needs to be reset? Im completely lost right now. Any help would be great. |
Bad_karma
| | Posted on Sunday, May 18, 2008 - 01:36 am: |
|
What are you doing when you start it? Neutral and hit the starter button? Holding the clutch in then letting it out. We need a little more detail and what was entailed in the dumped?
Joe |
Ejoyal
| | Posted on Sunday, May 18, 2008 - 10:42 am: |
|
Well it is a fuel injected bike. Turn the ignition switch to on and hit the start button. Ive tried swapping sensors from an 07 street glide but I still have nothing. The front end was twisted in a crash where the bike landed on its side. This is why im wondering if the bank angle sensor would have something to do with this. It fires up fine sounds like its going to stay running and then dies. Everytime it stays running for about 2 or 3 seconds. The bike is in neutral and Ive tried pulling in the clutch as well. |
Ejoyal
| | Posted on Thursday, July 03, 2008 - 08:49 pm: |
|
Just an update. I got the bike running. Had to run an hour long sequence (took three times) to re-program the ECM to the ALarm system. |
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through July 22, 2008 »
I have a Buell but this is an 07 Road King with running issues