Author |
Message |
Lightningstrikes
| Posted on Tuesday, June 24, 2008 - 03:44 pm: |
|
Is there anyone in the Cincinnati, Dayton, Columbus, or northern Ky areas that has ECM spy and is able to help me with re-setting my ECM. |
Ft_bstrd
| Posted on Tuesday, June 24, 2008 - 06:02 pm: |
|
Check with dobr24. He's in Cincinati and might be able to help you. |
Ulywife
| Posted on Tuesday, June 24, 2008 - 07:25 pm: |
|
I edited your topic so maybe some of the OH folks will take a peak inside. Good luck! |
Xb9
| Posted on Wednesday, June 25, 2008 - 09:31 am: |
|
I'm in Cleveland and could help you out. |
Ohio_xb12
| Posted on Wednesday, June 25, 2008 - 09:56 am: |
|
Not to thread Hi-Jack but XB9 I am also in Cleveland and sure would like to find some local guys to ride with. Where are you at? |
Ulywife
| Posted on Wednesday, June 25, 2008 - 10:37 am: |
|
Xb9 - nice offer! Lightningstrikes - good luck with the reset. Also, have you checked out the Cincinnati Area Buellers? http://www.badweatherbikers.com/buell/messages/37/ 301127.html?1212590115 Ohio & Xb9 - check out http://www.badweatherbikers.com/buell/messages/37/ 369286.html?1214357275 |
Lost_in_ohio
| Posted on Wednesday, June 25, 2008 - 02:45 pm: |
|
I am in Columbus and could help if needed. Just pm me. I have completed an number of TPS resets for guys on the board. (Message edited by lost_in_ohio on June 25, 2008) |
Lightningstrikes
| Posted on Wednesday, June 25, 2008 - 02:52 pm: |
|
Thanks, I appreciate the offers. I'm waiting on a fuel pump wiring harness to come in at the moment. Once that is installed if the bike still isn't running right I will take you up on the offer. Thanks again, Justin |
Xb9
| Posted on Wednesday, June 25, 2008 - 06:15 pm: |
|
OhioXb12, SE of CLeveland, near Chagrin Falls. And I have ECMSpy w/cable if anyone needs some work. Just PM me. |
Tpoppa
| Posted on Thursday, June 26, 2008 - 02:17 pm: |
|
Ohio_xb12. PM sent |
Sfinton
| Posted on Thursday, June 26, 2008 - 04:31 pm: |
|
If your around the Dayton,Cinci,Cbus area I would like to join in on this. I also need one and dont know what the hell I'm doing. |
Lightningstrikes
| Posted on Thursday, June 26, 2008 - 05:45 pm: |
|
I bit the bullet and decided to just buy all the stuff. Purchased a cable, and a used laptop from a family member. So, I should be able to perform it myself. Been reading up on the use of ECMspy and it doesn't look too complicated. I'll give it a try once the cable arrives. Sfinton give me a few weeks to get familiar with the program and I'd be glad to help ya out. |
Reepicheep
| Posted on Thursday, June 26, 2008 - 06:23 pm: |
|
I don't have the laptop adapter, but have no shortage of laptops, palm pilots, etc, and am pretty handy with using them (and building connectors, etc). I am in Lebanon and am happy to help... you will just have to step over all the little KLR parts spread all over the garage |
Cold_iron
| Posted on Thursday, June 26, 2008 - 07:02 pm: |
|
anyone near south chicago? |
Dobr24
| Posted on Thursday, June 26, 2008 - 07:23 pm: |
|
I am in Cincy and can do tps resets and Ecmspy work. Chris |
Sfinton
| Posted on Thursday, June 26, 2008 - 08:26 pm: |
|
Dobr24 & Lightningstrikes, I gotta get my air box situation straightened out first (opened it w/ no race ecm..goin back to closed when I find one) and then I'll have to take up your offer. |
Lightningstrikes
| Posted on Thursday, June 26, 2008 - 08:33 pm: |
|
You can program the race ECM maps into the stock ECM and crate a race ECM without having to spend the extra dough on one. Just to let you know. |
Dobr24
| Posted on Friday, June 27, 2008 - 08:58 am: |
|
sfinton, Why do you want to go back to a closed airbox? |