Author |
Message |
Rockstarblast1
| Posted on Monday, June 23, 2008 - 11:15 pm: |
|
ok so i got done working on my bike all weekend and i put the jardine exhaust on made an intake re jetted the carb 48/175, iridium sparkplug,8mm wire.new bars, new grips and A crg bar end mirror set up. well maybe its just me but i cant see crap outta that mirror.... any one else have this problem? also im getting a weird smell from the bike kinda burnt idk does the muffler make a weird smell because its brand new? also allready my header pipe is getting a gold-ish color to it mainly up top towARD the head. any input is great thanks chris |
Ezblast
| Posted on Monday, June 23, 2008 - 11:24 pm: |
|
Gold is good! Yes to the smell of a new muffler - lol The 2" CRG - aim it for the area you want to see in - if something fills that spot - don't go that way! - lol - thats how I have always run them - I'm used to them - some like the larger 3" CRG fold aways - you see more, some like the rectangular old cafe type, Erik runs them - they are very good - depends on what your looking to do with them - I run inexpensive 3rd Eye 3" Bar Ends on my city bike because they do well and are inexpensive to replace. EZ (Message edited by ezblast on June 23, 2008) |
Gearheaderiko
| Posted on Monday, June 23, 2008 - 11:34 pm: |
|
Gold is rich, blue is lean. Its unlikely that you'll ever keep it from discoloring one way or the other without obsessive cleaning. (Message edited by gearheaderiko on June 23, 2008) |
Rockstarblast1
| Posted on Tuesday, June 24, 2008 - 08:13 am: |
|
Well as of right now after riding last night and to work its pretty damn gold! Lol what should I do? Also what's the header pipe made of? As when I got it, it wasn't polished at all and it kinda disapointed me. As I need to polish it now, but don't know the best way to do it. And lastly what are some diffrent levers I can put on that don't cost a whole lot. I know crg's are like 100 a piece... anything else. I don't like how stock is so big. And if not what crg's will fit without any problems. |
Ezblast
| Posted on Tuesday, June 24, 2008 - 11:06 am: |
|
Leave it - it is the ideal header color - as long as your not black or blue - your golden. M2 levers fit and CRG made for M2 fit as well. EZ (Message edited by ezblast on June 24, 2008) |
Imadreadhead
| Posted on Tuesday, June 24, 2008 - 04:22 pm: |
|
so these will fit? http://cgi.ebay.com/BUELL-S1-M2-XB-RED-LEVERS_W0QQ itemZ260254373401QQihZ016QQcategoryZ25632QQrdZ1QQs sPageNameZWD2VQQcmdZViewItemQQ_trksidZp1638Q2em122 |
Rockstarblast1
| Posted on Tuesday, June 24, 2008 - 04:22 pm: |
|
Thanks EZ! Any chance somewhere there's a how to on polishing?? Also what's the jardine made out of? Thanks again chris |
Imadreadhead
| Posted on Tuesday, June 24, 2008 - 04:24 pm: |
|
start with some high grit sandpaper..maybe even wetsand...then itll look like chrome |
Ezblast
| Posted on Tuesday, June 24, 2008 - 05:26 pm: |
|
The XB and M2 are not interchangable - the seller is mixed up. Just follow the instructions on the bottle of Mothers exhaust chrome polish - lol - all I ever have done is wiped mine down with WD40 - prevents rust. EZ |
Gearheaderiko
| Posted on Wednesday, June 25, 2008 - 02:06 am: |
|
Concur! Others also make exhaust polishes such as 'Blue Away" specifically for your problem. I'd only resort to sandpaper when your exhaust gets old. They also make coatings for inside the pipe, but I think you're too late for that! |
Rockstarblast1
| Posted on Wednesday, June 25, 2008 - 11:23 pm: |
|
yea proably iv allready ran almost a full tank of gas through the bike with the new pipe now |
Fast1075
| Posted on Sunday, June 29, 2008 - 10:44 am: |
|
My Jardine headpipe is a nice golden color also..darker near the head..the jetting is slightly rich with 45/175...the pipe is made from some sort of stainless...I carefully wiped mine down with brake clean before I fired it for the first time to be sure it had no oil or fingerprints on it, so the color seems to be normal for that variety of steel...I doubt that anything will keep it shiny short of an absolute compulsion to buff and polish. I think it looks good the way it is...wish it was titanium (it would color even more).. |
Ezblast
| Posted on Sunday, June 29, 2008 - 02:09 pm: |
|
Must be the humidity - hmmm EZ |
Rockstarblast1
| Posted on Monday, June 30, 2008 - 11:32 pm: |
|
ur rich with a 45/175???? i did a 48/175 but i have a diffrent aircleaner on mine also. do u? |
Ezblast
| Posted on Monday, June 30, 2008 - 11:42 pm: |
|
45/175 should have you dancing between 14 and 15 af - more to the 14 side true by just a little - still lean on the bottom - the pipe will turn gold from heat - the dark is from leanness, if rich excess soot building on the rear edge of the tail pipe, hard time idling down also. EZ |
Gearheaderiko
| Posted on Tuesday, July 01, 2008 - 12:01 am: |
|
Rich=slow idle. Lean=fast idle. |
Ezblast
| Posted on Tuesday, July 01, 2008 - 12:20 am: |
|
True, however, when a bike is rich it will fast idle then go down - like its winding down, down, down - lol - then go back to normal idle - God knows I've been on both sides of this - lol - lean is coming down to a fast idle and constantly idling at a fast idle, and popcorn from the exhaust sound - lean. Its my experience at least. Note some people don't realize they are lean because they mistake the fast idle for the fast idle circuit that occurs when the bike is cold. EZ |